Pro Maxima Raptor Series P-4100 Hi/Lat Pull Machine

Pro Maxima Raptor Series P-4100 Hi/Lat Pull Machine Features

• Tone and build your overall strength in your lats 
• 2" x 4" 11 gauge steel weight stack frame housing 
• Form fitted outer weight stack shield 
• Tri-axis handles for diverging pronated, supinated neutral grips.
• ABS seat & thigh pad protective dishes 
• Seamless upholstery 
• Red axis of rotation indicator 
• Natural rubber handgrips 
• Five-position seat adjustment 
• Bright red colored pull knobs 
• Instructional color placard 
• 225 lb. weight stack 
• 1/4" nylon coated aircraft cable-driven 
• 4800 lb. test 
• All pivoting axis have radial bearings

More Information

• Weight stack plates are solid steel machined precisely to within an oz of weight. 
• Weight stack is accessible from a seated position 
• Weight stacks are enclosed in full-length shrouds
• The weight system allows users to increase by 5 lb increments. 
• Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked. 
• Each machine is made with a lower starting weight stack and has counter-balanced arms when needed. 
• Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support. 
• Exceeds all ASTM requirements. 
• Guide rods are 1" CCRO ANSI 1045, solid steel hard chrome-plated with a tensile strength of 75,000psi. 
• Frames are constructed of High Stress 3/16" ASTM A-500 grade B structural steel tubing (11 gauge) 2"x4", 2"x3" tubing. 2"x3" tubing on all uprights, 2"x2"x1/8" ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches. 
• All welds are ground down and stress tested 
• Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long-lasting hardened finish. 
• Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0,10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30). 
• Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4" thick solid steel. The cams are different for each machine to provide correct movement for the exercise. 
• Shrouded pulley housing is 6"x1/4" thick solid steel. 
• Pulley wheels are 4" and 6" solid fiberglass reinforced body with a 1/2" cable groove. Oil dipped double sealed racer ball bearings with a 1/2" axis shaft hole. Sealed for moisture and dust proof.