Pride Synergy Solution Cushion
Pride Synergy Solution Cushion

Pride Synergy Solution Cushion

Brand/Manufacturer: PRIDE MOBILITY
Save

Pride Synergy Solution Cushion has three-component design for pressure management, positioning and long-lasting comfort. It features twin-cell, aqueous gel insert under at-risk bony areas and inner liner for incontinence and to reduce shear. Pride Solution Cushion provides lateral and anti-thrust support for clients in need of moderate positioning.

Item #DescPkgRewardPrice 
CUSASMB1966 16"W x 17"D Each $5.70
$380.00
$285.00
CUSASMB1008 16"W x 18"D Each $5.70
$380.00
$285.00
CUSASMB1967 16"W x 19"D Each $5.70
$380.00
$285.00
CUSASMB1009 16"W x 20"D Each $5.70
$380.00
$285.00
CUSASMB1968 17"W x 16"D Each $5.70
$380.00
$285.00
CUSASMB1248 17"W x 17"D Each $5.70
$380.00
$285.00
CUSASMB1969 17"W x 18"D Each $5.70
$380.00
$285.00
CUSASMB1249 17"W x 19"D Each $5.70
$380.00
$285.00
CUSASMB1970 17"W x 20"D Each $5.70
$380.00
$285.00
CUSASMB1010 18"W x 16"D Each $5.70
$380.00
$285.00
CUSASMB1011 18"W x 18"D Each $5.70
$380.00
$285.00
CUSASMB1971 18"W x 19"D Each $5.70
$380.00
$285.00
CUSASMB1012 18"W x 20"D Each $5.70
$380.00
$285.00
CUSASMB1013 18"W x 22"D Each $5.70
$380.00
$285.00
CUSASMB1972 19"W x 18"D Each $5.70
$380.00
$285.00
CUSASMB1251 19"W x 19"D Each $5.70
$380.00
$285.00
CUSASMB1973 19"W x 20"D Each $5.70
$380.00
$285.00
CUSASMB1014 20"W x 16"D Each $5.70
$380.00
$285.00
CUSASMB1015 20"W x 18"D Each $5.70
$380.00
$285.00
CUSASMB1974 20"W x 19"D Each $5.70
$380.00
$285.00
CUSASMB1016 20"W x 20"D Each $5.70
$430.00
$285.00
CUSASMB1017 20"W x 22"D Each $5.70
$430.00
$285.00
CUSASMB1019 22"W x 18"D Each $6.70
$430.00
$335.00
CUSASMB1021 22"W x 22"D Each $6.70
$430.00
$335.00
CUSASMB1024 24"W x 20"D Each $6.70
$430.00
$335.00
CUSASMB1025 24"W x 22"D Each $6.70
$430.00
$335.00

Features

  • Pride Synergy Solution Cushion promotes better circulation
  • Lateral and pre-ischial shelf contoured into high density molded foam base
  • Twin-cell, aqueous gel insert under at-risk bony areas
  • Moisture wicking four-way stretch cover
  • Viscoelastic total top layer
  • Designed for clients who need mild to moderate skin protection
  • Reduces shear and moisture build-up
  • Weight capacity: 350lb

More Information

  • To clean the cushion:
    - Locate the zipper on the rear side of the outer cover.
    - Unzip the outer cover and pull out the assembled inner cushion components. If your cushion has a fluid-resistant inner cover, the inner cushion should not be removed from the fluid-resistant inner cover unless you’re replacing the inner cushion. Refer to the Synergy Cushion Feature Table on the front cover to determine if your cushion has a fluid-resistant inner cover
    - Wash the outer cover in a washing machine on the COLD setting. Washing should be done periodically based on usage
    - If you have a Simplicity or Solution 1, spray the inner cushion with disinfectant. If your cushion has a fluid-resistant inner cover, spray the fluid-resistant cover with disinfectant. Refer to the Synergy Cushion Feature on the inside of the front cover to determine if your cushion has a fluid-resistant inner cover
    - Allow the outer cover and inner cushion components to air dry
    - Once the cover and inner cushion components are dry, put the assembled inner cushion components back inside the cover. Zip the cover closed, and place the cushion back onto the seat of your chair.
  • Assembling inner cushion components:
    The cushion arrives assembled, but will need to be reassembled after cleaning
    To assemble the cushion
    - Place the air insert on the seat base taking care to align the hook and loop fasteners on the front of the insert with those on the seat base.
    - Place the Sil-Air foam around the air insert
    - Route the air hose under the foam and along the cut-out in the foam.
    - Lift the access panel flap.
    - Place the assembled cushion into the outer cover with the front of the cushion going into the outer cover first.
    - Insert the air hose through the hole in the outer cover so that the end of the air hose is in the access panel.
    - Close the access panel.
    - Zip the outer cover closed.

Customer Reviews

Questions & Answers


 
 

Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close