Pride Synergy Simplicity Cushion
Pride Synergy Simplicity Cushion

Pride Synergy Simplicity Cushion

Brand/Manufacturer: PRIDE MOBILITY
Save

Pride Synergy Simplicity Cushion provides lateral support for clients in need of mild positioning. It features deep contoured, high-density molded foam base and moisture wicking four-way stretch incontinence cover. It provides coccyx and sacral relief and reduces moisture build-up.

Item #DescPkgPrice 
CUSASMB1547 16"W x 16"D Each $125.99 $80.00
CUSASMB1548 18"W x 16"D Each $125.99 $80.00
CUSASMB1549 18"W x 18"D Each $125.99 $80.00
CUSASMB1550 20"W x 18"D Each $125.99 $80.00
CUSASMB1798 16"W x 18"D Each $125.99 $80.00
CUSASMB1799 20"W x 16"D Each $125.99 $80.00
CUSASMB1934 24"W x 18"D Each $145.99 $115.00

Features

  • Pride Synergy Simplicity Cushion has high-density polyurethane foam construction
  • Exclusive wrap-and-lift design for pressure management
  • Four-way stretch, fluid resistant upper cover
  • Coccyx and sacral relief
  • Weight capacity: 350lb
  • Click Here for Owners Manual

More Information

  • To clean the cushion:
    - Locate the zipper on the rear side of the outer cover.
    - Unzip the outer cover and pull out the assembled inner cushion components. If your cushion has a fluid-resistant inner cover, the inner cushion should not be removed from the fluid-resistant inner cover unless you’re replacing the inner cushion. Refer to the Synergy Cushion Feature Table on the front cover to determine if your cushion has a fluid-resistant inner cover
    - Wash the outer cover in a washing machine on the COLD setting. Washing should be done periodically based on usage
    - If you have a Simplicity or Solution 1, spray the inner cushion with disinfectant. If your cushion has a fluid-resistant inner cover, spray the fluid-resistant cover with disinfectant. Refer to the Synergy Cushion Feature on the inside of the front cover to determine if your cushion has a fluid-resistant inner cover
    - Allow the outer cover and inner cushion components to air dry
    - Once the cover and inner cushion components are dry, put the assembled inner cushion components back inside the cover. Zip the cover closed, and place the cushion back onto the seat of your chair.
  • Assembling inner cushion components:
    The cushion arrives assembled, but will need to be reassembled after cleaning
    To assemble the cushion
    - Place the air insert on the seat base taking care to align the hook and loop fasteners on the front of the insert with those on the seat base.
    - Place the Sil-Air foam around the air insert
    - Route the air hose under the foam and along the cut-out in the foam.
    - Lift the access panel flap.
    - Place the assembled cushion into the outer cover with the front of the cushion going into the outer cover first.
    - Insert the air hose through the hole in the outer cover so that the end of the air hose is in the access panel.
    - Close the access panel.
    - Zip the outer cover closed.

Warranty

2 year limited warranty

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close