Get 10% OFF*, Use Code: HPDIS10

Day
:
:
Online since 2002 |   866-316-0162

View product option

Precision Medical EasyComp Air Compressor

Precision Medical EasyComp Air Compressor is a powerful, high performance compressor that can be used anywhere effectively where convenient aerosol treatments are needed. The pressure gauge is slanted making it easier to read. It comes with a VELCRO brand strap for easy cord wrapping and non-marring suction feet to attach the unit securely to most surfaces without damaging or marking the surface. The basic function is to supply a portable compressed air source adequate to drive high volume nebulizers.

EasyComp Air Compressor Highlights

  • Powerful - High performance
  • Versatile - Anywhere effective and convenient aerosol
  • Easy to Use
  • Lightweight
  • Safety is assured

EasyComp Air Compressor Features

  • Precision Medical EasyComp Air Compressor comes with hospital grade power cord
  • Powerful 1/5 horsepower high performance compressor delivers a minimum of 15 lpm at 50 psi
  • Safety is assured with the automatic resetting thermal limit switch which prevents the unit from overheating
  • Lightweight, weighing only 10.8lb
  • Easy to carry by any caregiver

What to buy with Precision Medical EasyComp Compressor?


EasyComp Air Compressor Guide

How To Operate EasyComp Compressor?

  1. Become familiar with the Compressor.
  2. Place Compressor near a properly grounded electrical receptacle on a table, floor or other horizontal, smooth, hard surface. Allow a minimum of 4 in. (10 cm) clearance on all sides to ensure adequate air flow for cooling of product.
  3. Press down on Compressor until Suction Feet are secure.
  4. Ensure the On/Off Switch is in the OFF position.
  5. Plug the Compressor into a properly grounded receptacle.
  6. Attach appropriate device to the Outlet Fitting, securely, without over-tightening.
  7. Press the On/Off Switch to the ON position.
  8. Adjust pressure.
    - To INCREASE pressure - Turn Knob CLOCKWISE
    - To DECREASE pressure - Turn Knob COUNTERCLOCKWISE
  9. Begin procedure.
  10. When procedure is complete, press the On/Off Switch to the OFF position.

  • Maintenance and Cleaning:
    - Turn the Easy Comp Compressor off and disconnect from any external power source before cleaning 

  • To clean the filter (weekly):
    - Unplug Compressor.
    - Pry off filter end cap to check air filter for dust buildup.
    - If dust buildup occurs, remove air filter and wash in warm, soapy water and rinse.
    - Absorb excess water from filter with a dry towel.
    - Return filter and end cap

  • Cleaning for Exterior Components:
    - Disconnect the Aspirator from power source and other connections before cleaning
    - Use a cloth or sponge dampened with soap and water
    - Wipe dry with a clean cloth or paper towel
    - Store the Aspirator in a clean area free from grease, oil, and other sources of contamination

  • Caution:
    -
    This Easy Comp Compressor is not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide.

Precision Medical Air Compressor Specification

Particulars Dimensions
Dimensions Length: 10.25" (26.04cm)
Width: 5.3" (13.3cm)
Height: 9.5" (24.1cm)
Weight Unit Weight: 10.8lb (4.9 kg)
Output Minimum of 13 lpm @ 50 psi
Electrical 120VAC, 60Hz, 5Amps
Horsepower 1/5 Horsepower
Storage Conditions Temperature: -4°F. to 120°F. (-20°C. to 40°C.)
Humidity: Max 95% Non-condensing
Operating Temperature Range 50°F. to 104°F. (10°C. to 0°C.)

Warranty

1 Year warranty

Product Videos

Related Articles

{{x.Heading}}

{{x.ShortDescription}} ...

Share

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
Message
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close