Omron Focus Knee Replacement Pad

How to attach Omron Focus Knee Replacement Pad

• Put the connector of the pad through the band port.
• Hook one side of the device onto the band. Attach the connector to the connection port and push the device until it clicks.
• Make sure the connection port is attached firmly to the connector.
• Refer to the Focus instruction manual to place the pad below your knee.

How to clean Omron Knee Replacement Pad?

• Remove the device from the pad.
• Wipe the adhesive surface with a soft non-paper based cloth moistened with water.
• Do not damage the gel.
• Place the pad onto the pad holder to allow the adhesive surface to air-dry.
• Note:
  • If the adhesive surface is too wet, turn it over and let it air dry before placing the pad onto the pad holder.
  • Drying the pad too long may cause adhesive strength to weaken.
  • Store it immediately after drying.

Things to remember while using Replacement pads?

• Do not use the pad after the expiration date.
• Do not touch the adhesive surface of the pad with your fingers.
• If the pad accidentally sticks to clothing, slightly moisten the pad from the opposite side of the clothing and then, peel it off.
• Do not forcibly peel the pad off of the clothing.
• Clean or change the pad when it loses adhesion.
• Replace the pad after 30 uses. The life of the pad may shorten due to your skin condition or the amount of perspiration that accumulates under the band while wearing it.
• If the adhesive surface peels off or slides or you feel that the treatment intensity has weakened, replace the pad immediately.

What to buy with OMRON TENS Focus Knee Replacement Pads

• Omron Focus TENS Therapy for Knee
• BioMedical Tens Prep Wipes
• BioMedical Electrolyte Solution And Skin Prep Spray