Med-Lift Model 4653 Three Way Recline Lift Chair
Med-Lift Model 4653 Three Way Recline Lift Chair

Med-Lift Model 4653 Three Way Recline Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge
  • Made in USA

Med-Lift Model 4653 Three Way Recline Lift Chair is designed to enable the user to go from a standing position to a sitting position and then back to a reclined position with the touch of a fingertip. Med-Lift 4653 Lift Chair features a four-pillow waterfall style back with two vertical padded sides extending down to the top of the armrest. The gently curved armrests are wider at the top for more comfort on arms.

Buy this product and earn 52.95 Reward Dollars.

Cannot be shipped Rush or Expedited delivery.

  • Color
    View Color Swatches
  • Recline Position
  • Vibrator And Heat
  • Snap on Head Pillow
  • Optional Accessories
  • Delivery Options
  • Total: $1380
    Total: $1059
Total: $1380
Total: $1059

Give me a Better Price

Med-Lift 4653 Recline Lift Chair

Key Features:

  • Comes standard with chaise pad
  • Waterfall fiber filled back
  • Super sagless heavy duty lift mechanism
  • 5 no sag seat springs
  • Low volt quite motor
  • Acella Flex foam seating
  • Magazine pocket on outer right-hand side of the chair
  • Armrest and head covers are standard
  • Weight capacity: 375 lbs.
  • Designed to accommodate a person ranging from 5 feet 2 inches to 6 feet 2 inches tall
  • Note: Battery back-up system is not available with the Vib/Heat upgrades

Construction Material:

  • Fiber: 5%
  • Foam: 10%
  • Fabric: 10%
  • Steel: 30%
  • Fasteners and miscellaneous: 5%

More On Med-Lift 4653 Lift Chair

Chair Frame:

  • All kiln dried hardwood
  • All stress points are kiln dried oak
  • All joints are glued and connected with steel fasteners
  • Uni-construction of seat-back assembly independently lab tested for strength and durability
  • Gang nails are used at all other critical joints or stress points
  • All bolts used are grade 5
  • Bolts go entirely through the wood
  • No lag screws are used to secure the mechanism
  • Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair
  • All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut
  • All wood screws that are used are the best and strongest
  • Corner blocks are used throughout the chair at all critical points for added strength
  • An extra rail is used across the top of the seat back to help keep the back straight and square

Acella-Flex Foam:

  • Used for padding, as it is the closest to a perfect seating configuration in the industry
  • It basically pushes back 1 lb. for every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs
  • It retains 99.9% of its original shape and size
  • Most conventional foam will shrink 10 - 15% in size over the first couple of years
  • Med-Lift uses a special break-in process before the foam is even cut, to make the foam feel good from its first use forward
  • Additionally, MedLift glues a super soft layer on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life

Seat Springs:

  • 9 gauge Morley system, no sag springs
  • The springs are tied together with tie wire to make every spring work together as a seat unit
  • Seat springs are correctly spaced on the spring rails by a special clip rail machine
  • The front seat rail on the frame is larger and thicker, which makes the seat much stronger and durable
  • There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen
  • The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance
  • To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used

Back Fiber:

  • All fabric used on the MedLift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly
  • The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber
  • This feature makes the backs retain their original shape, while also offering greater comfort

Lift Base:

  • The foundation of the chair is the lift base
  • Super Sagless lift base is the best available
  • It will withstand constant use and abuse that a lift chair must endure
  • A lift base must be as wide as the base of the chair, and the Super Sagless base is the most stable base in the upright position

Med-Lift 4653 Specifications

Weight Capacity375 lb
Overall Width35"
Overall Depth41"
Overall Height43"
Overall Reclined Length69"
Front of Ottoman to Back of Seat39"
Seat Width Between Arm21"
Seat Depth24"
From Seat to Top of Arm5"
Seat Height from Floor20"
Back Height from Seat24"
Ottoman Height from Floor21"


  • Lifetime warranty on wood frame, lift mechanism & reclining hardware
  • 4 years warranty on remaining items

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
question image
Can the foot rest raise without the chair going back?
Juli - 10/15/2015 8:01:02 PM
answer image
Thank you for your inquiry. No I’m sorry that’s a 3 way chair and on that chair when the ottoman starts to come out the back starts to recline also.
Customer Service - 10/17/2015 1:57:09 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using