Med-Lift 47 Series Three-Way Reclining Lift Chair
Med-Lift 47 Series Three-Way Reclining Lift Chair

Med-Lift 47 Series Three-Way Reclining Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge
  • Made in USA

Med-Lift 47 Series Three-Way Reclining Lift Chair takes users from the standing position to the sitting position and then on to the reclining position with the tip of the finger. It features a squared double waterfall backrest with a wide vertical cushion on each side extending down to the bottom of the inner armrest. Armrests gently curve out and have a slightly rounded top surface for greater comfort level on the arms. Med-Lift 47 Series Chair has a weight capacity of 375 lbs.

Buy this product and earn 13.39 Reward Dollars.


  • Color
    View Color Swatches
  • Recline Position
  • Vibrators And Heat (Battery Backup Not Available))
  • Optional Accessories
  • Delivery Option
  • Total: $1749
    Total: $1339
Total: $1749
Total: $1339

Give me a Better Price

Med-Lift 47 Series Reclining Lift Chair

Key Features:

  • Fiber filled back
  • Chaise pad is a standard feature on this model
  • Low volt quiet motor
  • 5 no-sag seat springs
  • Acella-Flex foam seating
  • Magazine pocket on the outer right-hand side
  • Waterfall back style with zippers in pillows so one can adjust the firmness and feel of each pillow
  • Armrest and headrest cover
  • Webbing in back for superior support of pillows
  • Super sagless heavy duty lift mechanism
  • Note: Battery back up system is not available with the purchase of the Ultra-EZZ III Massage system upgrade or the 2, 4 and 6 Vibrator/Heat upgrades

Construction Material:

  • Fiber - 5%
  • Foam - 10%
  • Fabric - 10%
  • Steel - 30%
  • Fasteners and miscellaneous - 5%

More On Med-Lift 47 Series Reclining Lift Chair

Chair Frame:

  • Sll kiln dried hardwood
  • All stress points are kiln dried oak
  • All joints are glued and connected with steel fasteners
  • Uni-construction of seat-back assembly is independently lab tested for strength and durability
  • Gang nails are used at all other critical joints or stress points
  • All bolts used are grade 5
  • Bolts go entirely through the wood
  • No lag screws are used to secure the mechanism
  • Mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight throughout the lifetime of the chair
  • All critical connection points for reclining hardware, etc. have a double locking nut, made of nylon aircraft grade quality 
  • All wood screws that are used are the best and strongest available
  • Corner blocks are used throughout the chair at all critical points for added strength
  • An extra rail is used across the top of the seat back to help keep the back straight and square

Acella-Flex foam:

  • The foam used in all chairs is Acella-Flex, which was developed by Leggett and Platt for use in better upholstered furniture
  • Acella-Flex foam is the closest thing to a perfect seating configuration
  • This foam basically pushes back one pound for every pound of weight exerted on it
  • This characteristic makes the chairs, basically, sit the same for a person of 90 lbs. as for aperson of 300 lbs.
  • Acella-Flex will keep 99.9% of its original shape and size
  • Most conventional foam will shrink 10-15% in size over the first few years
  • Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward
  • As an added benefit to foam, a super soft layer is glued on top of the Acella-Flex which gives a very nice feel to the seat, while still giving the Acella-Flex base for strength and long life

Seat Springs:

  • 9 gauge Morley system, no sag springs
  • Seat springs are tied together with tie wire to make every spring work together as a seat unit
  • Seat springs are correctly spaced on the spring rails by a special clip rail machine
  • The front seat rail on the frame is larger and thicker, which makes the seat much stronger and durable
  • There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen
  • The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance
  • To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used
  • The fiber used in the backs is a dustless, odorless, non-allergenic conjugated fiber

Lift Base:

  • The foundation of the chair is the lift base
  • After testing all the lift bases, it has been determined that Super Sagless lift base is the best available
  • It will withstand constant use and abuse that a lift chair must endure
  • A lift base must be as wide as the base of the chair, and the Super Sagless base is the most stable base in the upright position


  • All fabrics used on all Med-Lift chairs meet both CAL 117 and UFAC requirements of flammability
  • Independent lab tests are conducted for fabrics, foam and fibers once a year to ensure that they meet correct specifications

Med-Lift 47 Series Specifications

 Options:4753 ( 3 Way)
Overall Width35"
Overall Depth41"
Overall Height45"
Overall Reclined Length70"
Front of Ottoman to Back of Seat39"
Seat Width between arms21"
Seat Depth23"
From Seat to Top of Arm5"
Seat Height from Floor20"
Back Height from Seat26"
Ottoman Height from Floor21"


Lifetime warranty on wood frame, lift mechanism and reclining hardware, four-year warranty on all other components.

Customer Reviews

Questions & Answers

Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using