Med-Lift 15 Series Two Way Petite Lift Chair
Med-Lift 15 Series Two Way Petite Lift Chair

Med-Lift 15 Series Two Way Petite Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge

Med-Lift 15 Series Two Way Petite Lift Chair is made to be the perfect lift chair with technology to complement the mobility a petite person is looking for. It is specifically designed and engineered to provide years of carefree operation with one simple touch of the fingertip. 2-Way Petite Lift Chair will enable the user a quiet, gentle motion allowing him/her to go from a sitting position to a reclining position and back to a standing position.

Buy this product and earn 40.45 Reward Dollars.


Cannot be shipped Rush or Expedited delivery.

  • Color
    View Color Swatches
  • Recline Position
  • Vibrating Massage And Heat
  • Chaise Pad
  • Optional Accessories
  • Delivery Option
  • Total: $1089
    Total: $809
Total: $1089
Total: $809

Give me a Better Price

2-Way Petite Lift Chair Features

  • Designed for the person who is 5 feet 2 inches and smaller, but needs a standard width chair
  • Shorter backrest height
  • Seat is closer to the floor
  • Button-tufted backrest for styling and comfort
  • Low volt quite motor
  • 5 No-sag seat springs
  • Fiber filled back
  • Acella Flex foam seating
  • Magazine pocket on outside right-hand side of frame
  • Designed to match almost any decor
  • Armrest and headrest covers
  • All fabrics used on all Med-Lift chairs meet both CAL 117 and UFAC requirements of flammability
  • Weight capacity is 275 lbs
  • Construction Material:
    - Fiber - 5%
    - Foam - 10%
    - Fabric - 10%
    - Steel - 30%
    - Fasteners and miscellaneous - 5%
  • Note: Battery back-up system is not available with 2, 4 or 6 Vib/Heat systems

More On 2-Way Petite Lift Chair

Chair Frame:

  • The frame of the chair is all kiln-dried hardwood
  • All stress points are kiln-dried oak
  • All joints are glued and connected with steel fasteners
  • Uni-construction of seat-back assembly is independently lab-tested for strength and durability
  • Gang nails are used at all other critical joints or stress points. All bolts used are top quality grade 5
  • All bolts go entirely through the wood. No lag screws are used to secure the mechanism
  • The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair
  • All critical connection points for reclining hardware, etc., have a double locking nut, which is aircraft grade quality
  • All wood screws used are the best and strongest available
  • Corner blocks are used throughout the chair at all critical points for added strength
  • An extra rail is used across the top of the seat back to help keep the back straight and square

Seat Spring:

  • All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit
  • Seat spring are correctly spaced on the spring rails by a special clip rail machine
  • The front seat rail on the frame is larger and thicker than most competitors;, thus making it much stronger and durable
  • There is a retainer rail secured by steel brads on top of the seat springs to make sure that they do not come loose
  • The back springs used are 12 gauge, and these are also tied together with special tie wire for more comfort and endurance
  • To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used as well

Acella-Flex Foam Seating:

  • Developed by Leggett and Platt is the only foam used
  • It offers the closest thing to a "perfect seating configuration" that is available in the industry
  • Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted against it. This characteristic makes the chairs, basically, sit the same for a person of 90 lbs. as for a person of 300 lbs
  • Acella-Flex will keep 99.9% of its original shape and size. Most conventional foam will shrink 10-15% in size over the first couple of years
  • Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward
  • As an added benefit to foam,  a super soft layer is glued on top of the Acella-Flex which gives a very nice feel to the seat, while still giving the user the Acella-Flex base for strength and long life

Lift Base:

  • The foundation of the chair is the lift base
  • After testing all the lift bases, it is determined that the Super Sagless lift base (made in the USA) is the best available
  • While more expensive, it will withstand constant use and abuse of a lift chair
  • A lift base must be as wide as the base of the chair
  • Super Sagless base used is the most stable base in the upright lifted position


  • All fabrics used on all Med-Lift chairs meet both CAL 117 and UFAC requirements of flammability
  • Fabrics, foam and fibers once a year are tested in order to ensure that they meet correct specifications


 Options 1555 (2 Way Petite)
Overall Width32"
Overall Depth33.5"
Overall Height38"
Overall Reclined Length55"
Front of ottoman to Back of Seat34"
Seat Width between arms21"
Seat Depth17"
From Seat to Top of Arm4.5"
Seat Height from Floor17"
Back height from Seat23"
Ottoman Height from Floor21"
Weight capacity275 lbs
Recommended height range5 feet 2 inches


Lifetime warranty on wood frame, lift mechanism and reclining hardware, 4 years warranty on remainig items

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using