Mabis DMI HealthSmart Deluxe Fingertip Pulse Oximeter

Mabis DMI HealthSmart Deluxe Fingertip Pulse Oximeter

Brand/Manufacturer: MABIS DMI HEALTHCARE


Authorized Retailer Badge
This product is on backorder and will be available to purchase once it is back in stock.

Mabis DMI HealthSmart Deluxe Fingertip Pulse Oximeter is an easy and accurate way to monitor blood oxygen saturation levels and heart pulse rate. It is ideal for any situation in which a fast measurement of vital signs is needed. It features anti-motion technology which takes readings even with slight movement and automatically takes readings when finger is inserted.

Estimated Shipping Time: 8-12 Business Days


  • Mabis DMI HealthSmart Deluxe Fingertip Pulse Oximeter includes:
    - 2 AAA batteries
    - Case
    - Lanyard
    - Detailed guidebook
  • Bright, 2-color digital OLED display
  • Read from 2 directions
  • Plethysogram display
  • Switchable to perfusion index percentage display
  • Auto power off when finger is removed
  • Fits adults and children
  • Latex free
  • Note: This fingertip pulse oximeter is not a medical device and can not be used for medical diagnostic and treatment activities

More Information

  • Important Information Before Use:
    - The finger should be put in properly and correctly
    - Do not shake the finger. Keep at ease during measurement
    - Avoid placing the device on the same limb which is wrapped with a cuff for blood pressure measurement during venous infusion
    - Do not let anything block the emitting light from device
    - Vigorous exercise and electrosurgical device interference may affect the measuring accuracy
    - The gravity sensor works on the basis of gravity. A small movable metal ball is built in the gravity-sensor for detecting the orientation of the oximeter. When you want to change the oximeters display direction, if you move the oximeter too slowly, the movable ball will also move slowly because of not enough acceleration. Consequently the response of orientation detection would be delayed. Please move the oximeter with a bit of force if you want to change the display direction (such as bend/extend your finger quickly), so an acceleration is provided to the gravity-sensor for quick sensing the orientation change
    - Due to the working principle of orientation sensor used in the oximeter, there is a small metal ball which is movable within its compartment of the gravity sensor. Therefore you may hear a slight clatter sound when you wave or shake the oximeter. It is normal and not caused by an unwanted part
    - Using enamel or other makeup on the nail may affect the accuracy of the measurement
  • Using Your Pulse Oximeter:
    - Open the clip and place finger into the rubber cushions of the clip, and clip shut
    - Wait two seconds and the oximeter will power on automatically and begin measurement
    - Press and release the Display Key to change the display direction
    - Press and hold the Display Key to shift the parameter display between PR and PI
    - Remove finger and the oximeter will power off automatically
  • Cleaning:
    - Surface-clean sensor with a soft cloth by wetting with a solution, such as 75% isopropyl alcohol
    - If low-level disinfection is required, use a 1:10 bleach solution
    - Surface-clean body with a cloth saturated with clean water and dry with a clean, soft cloth
    Caution: Do not sterilize by irradiation steam or ethylene oxide
  • Maintenance:
    In order to ensure long service life for your pulse oximeter, please follow the below maintenance guidelines:
    - Change the batteries when the low indicator light appears
    - Clean the surface of the device before using
    - High-pressure sterilization cannot be used on this device
    - Do not immerse device in liquid
    - It is recommended that the device should be kept in a dry environment
    - Humidity may reduce the life of the device, or even damage it


Power Source2 "AAA" batteries (1.5V)
Supply voltage: 3VDC
Operating current: =40mA
SpO2 ParameterMeasuring range: 35% - 99%
Accuracy: 70% - 100% ± 3%
Pulse Rate ParameterMeasuring range: 30bpm - 240 bpm
Accuracy: ± 2bpm or ± 2% (whichever is greater)
Perfusion Index (PI) DisplayRange: 0% - 20%
Operation EnvironmentTemperature: 41°F - 104°F (5°C - 40°C)
Humidity: 30% - 80%
Pressure: 70kPa - 106kPa
Performance Under Low Perfusion ConditionSame with modulation amplitude as low as 0.6% 
Resistance to Light Interference± 1%
Resistance to 50Hz/60Hz InterferencePrecise
Unit Dimensions2.6" L x 1.4" W x 1.3" H
Unit Weight2 oz
AccessoriesLanyard, two "AAA" batteries, pouch, detailed guidebook


2 Year limited warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory


The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using



Also available:

${{ x.OurPrice | currency: "" : 2}}

Articles & news

Related Articles


{{x.ShortDescription}} ...

Questions & Answers

Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.