Leggett & Platt Pro-Motion 2.0 Adjustable Bed Base
Leggett & Platt Pro-Motion 2.0 Adjustable Bed Base

Leggett & Platt Pro-Motion 2.0 Adjustable Bed Base

Brand/Manufacturer: LEGGETT & PLATT
Authorized Retailer Badge
  • Made in USA

Leggett & Platt Pro-Motion 2.0 Adjustable Bed Base creates the perfect environment for reading a book, watching TV, or just relaxing after a long day by raising the head and foot. The base gives the user the comfort and ease of an adjustable bed at a great price. This sleek base adds adjustable comfort to the bedroom with a low-profile design that fits into the decor.

Buy this product and earn 33.8 Reward Dollars.

  • Bed Size
  • Delivery Options
  • Total: $999.99
    Total: $675.99
Total: $999.99
Total: $675.99

Leggett & Platt Pro-Motion 2.0 Features

  • Leggett & Platt Pro-Motion 2.0 Adjustable Bed Base is upholstered in a gorgeous contemporary gray patterned fabric, making it a great neutral to fit any decor
  • Sleek wired black remote control allows user to effortlessly raise the head and foot with the touch of a button
  • 1-inch profile foundation-style base design easily fits inside the frame of bed
  • Base lets user effortlessly raise the head, foot, or both, to find perfect relaxation position
  • Exclusive MicroHook retention system eliminates the need for a mattress retainer bar at the foot of bed, providing a sleeker, more modern look
  • Included with split sizes, the sync cable allows both bases to raise and lower simultaneously
  • 850 lb. total max lifting capacity

How to Install Pro-Motion 2.0 Adjustable Bed Base

STEP 1: Before discarding any packing materials, open the adjustable base shipping carton and verify the following items are included:
• (4) 7 inch legs
• (1) Remote Control
• (1) Mattress Retainer
• (1) Sync Cable (split sizes only)
• (1) Warranty Activation Card
• (1) Owners Manual
• (1) Quick Setup Guide
STEP 2: Uncoil the main power cord and remote control and extend them out head end of base, then remove the hardware box from shipping container. Cut the zip-tie and remove the mattress retainer.
STEP 3: Install (4) legs into the base frame. Simply screw each leg into a tapped hole at each corner of the base frame.
STEP 4: With base still in shipping carton, rotate the entire bottom carton on its edge and then gently rotate over so base is resting on its legs.
STEP 5: Remove the shipping carton and plastic packaging from the adjustable base frame. Remove protective film from Micro-Hook strips, if applicable.
STEP 6: Plug electrical power cord into a working, grounded electrical outlet.
Note: An electrical surge protection device is recommended (not included).
STEP 7: Briefly activate all functions of the base with the remote control to verify all features are in working order. If base does not operate, refer to the Troubleshooting section of the manual.
STEP 8: Return base to the level position.
STEP 9: Install mattress retainer at the foot end of the adjustable base as follows:
a. Locate grommeted holes at foot end of base.
b. Place mattress retainer ends into grommeted holes in top surface of adjustable base.
Press down until horizontal retainer section is flush against base.
STEP 10: Install mattress on adjustable base.


Types Of BedDimensions
Twin XL38 x 80
Twin38 x 74
Full53 x 74
Queen60 x 80
King76 x 160
Cal King72 x 168
Split Queen60 x 160


  • 1st year Full Warranty
  • 2nd and 3rd years Limited Warranty
  • 4th through the end of 25th year Limited Warranty

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com