Invacare Tracer IV 20 Inches Desk-Length Arms Wheelchair

Invacare Tracer IV Wheelchair Features

• Dual axle position that allows variation of seat-to-floor height
• Padded, desk-length arms for added comfort
• 14-gauge crossbraces add durability and strength
• Folds to 13" wide for convenient travel and storage

Invacare Tracer IV Parts

How to use Invacare Tracer IV Wheelchair?

Unfolding the Wheelchair:

1. Tilt the manual wheelchair towards you (raising the opposite wheel and caster off the ground/floor).
2. Place your hand on the top of the seat rail closest to you where the seat upholstery is attached.
3. Point your fingers and thumb to the inside of the wheelchair.
4. Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks.
5. Engage both wheel locks, open the footrest/legrest for clearance and transfer into the wheelchair.

Folding Invacare Tracer IV:

• Swing footrest/legrest in locked position to front of the wheelchair.
• Pivot footplates upward to vertical position.
• With both hands, grasp the middle of the seat upholstery at the front and back edge and lift up.
• Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armrest towards you.


• Adjusting Armrest Height:
  
  
  1. Unlock the armrest by flipping the height adjustment lever on the top front of the armrest to the up (horizontal) position.
  2. Adjust armrest to one of five positions
  3. Lock the armrest by pressing the height adjustment lever into the down (vertical) position when the desired armrest height is achieved.
  4. Repeat Steps 1-3 for other armrest.
  
  Tracer 4 Wheelchair User Manual
   

  What to buy with Invacare Tracer IV Wheelchair?

  • Invacare Adductors 
  • Invacare Ergonomic Arm Troughs 
  • Invacare Composite Hemi Elevating Legrest 
  • Reclining Wheelchair Mount Bracket