Invacare Matrx PB Back

Invacare Matrx PB Back Features

• Foam:
  - Molded foam wraps around shell for maximum comfort and protection
  - Foam attaches to back shell via hook and loop strips for easy replacement
• Outer Cover:
  - Moisture resistant and breathable
• Hardware:
  - Easily installed and adjusted in minutes
  - Adjustments can be made while individual is seated in the wheelchair
• Back Shell:
  - Contoured shell provides exceptional midline support and positioning
  - Durable, lightweight ABS back shell includes built-in plate for headrest attachment
• Visco Foam Upgrade:
  - Laminate of 0.5" high resilient foam and 0.625" Visco Foam
• Click Here For User Manual

More On Invacare Matrx PB Back

Installing Matrx PB Back:

• Verify that the overall fit and alignment of the back is correct (make adjustments as needed).
• Fully secure the cane clamp screws onto both back posts, and tighten the set screws to ensure the mounting plates do not slip or rotate.
• To best determine the optimal depth and recline settings for the back, the user should be seated in the wheelchair. While seated, loosen the depth/recline screws on the mounting plates and adjust the back to the desired depth and recline angle. Re-tighten all screws to lock the back in position.
• Ensure that the depth/recline adjustment for the back is made symmetrically on the left and right mounting plates. Use score lines to make symmetrical adjustments.
• The vertical score lines on the mounting plates are designed as a point of reference to assist with symmetrical mounting. Since the back can be mounted in a rotated (reclined) position if desired, it will not always be mounted parallel with these vertical lines.

• The cover may easily be wiped down with a damp cloth when necessary
• The cover can be removed for laundering or providing access to the inside of the back for modification
• Open the zipper at the top and carefully remove the cover by releasing the velcro hook and loop fasteners along the sides of the back shell
• The zipper should be closed prior to laundering