Invacare I-Class Dual Release Adult Paddle Walker With Wheels

More On Invacare I-Class Paddle Walker

1. Swing both side frames (A) out away from the front crossbrace (B) until an audible "click" is heard and both locking mechanisms (C) engage.
2. Test the walker by grasping the side frames (A) and, with some force, try to fold them inward.
3. To fold the walker, press down on the locking mechanisms (C) and fold the side frames (A) in toward the front crossbrace (B).

1. Press the snap button and slide the leg extension onto the walker leg.
2. Adjust the leg extension to the desired height and allow the snap button to snap into the height adjustment hole.
3. Repeat Steps 1 and 2 as necessary.
4. Make sure that the walker is level.

1. Regular cleaning of the walker is recommended. Wipe all surfaces with a damp cloth and allow all surfaces to dry before use.
2. Regular inspection of parts including hardware, brackets, and plastics, for deformation, corrosion, breakage, wear or compression is recommended. Replace the walker if any of these conditions exist.
3. Ensure the handgrips do not twist on side frame. The handgrips must be tight. Do not use the walker if the handgrips are loose. Replace the walker if the handgrips are loose on the side frame.
4. If rubber tips are worn or cracked, replace the rubber tips immediately.

Specification

Warranty

Customer Reviews

Questions & Answers

Ask a Question

Enter your question below:

 

Security question 1+ 2 =   SubmitCancel

Enter your Answer below.

Security Question:1 + 2 =

	ItemQuestion ItemName - now
	Your question will show here once it will get approved.

	UserAnswer UserName - now Your Answer will show here once it will get approved.

Is this the adult walker with 5 inch wheels from invacare? Gloria - 6/26/2016 8:49:34 PM

ReplyShare

	Thanks gor contacting customer care service. Please refer Specification table on our product page. Customer Care - 6/27/2016 6:39:28 AM