Invacare Check O2 Plus Oxygen Analyzer
Invacare Check O2 Plus Oxygen Analyzer

Invacare Check O2 Plus Oxygen Analyzer

Brand/Manufacturer: INVACARE CORPORATION
Save
Authorized Retailer Badge

Invacare Check O2 Plus Oxygen Analyzer is an economical instrument that reports all the operating parameters necessary for performing oxygen concentrator checks. This analyzer is efficient, cost-effective and designed with technicians in mind. Check O2 Plus checks oxygen concentration, flow rate and patient outlet pressure on any oxygen concentrator. It is three analyzers rolled into one.

Item #DescPkgRewardPrice 
IRC450 0 LPM to 10 LPM Each $5.88
$809.99
$588.45

Invacare Check O2 Plus Analyzer

Key Features:

  • Measures three parameters, eliminating the need for multiple instruments: oxygen purity, flow rate and patient outlet pressure
  • Requires no routine calibration
  • No fuel cell to replace
  • Two AA batteries provide over 16,000 readings
  • Accurately measures oxygen purity of the Invacare XPO2 Portable Concentrator 
  • Features simple two-button operation
  • Shuts off automatically to extend battery life
  • Self-diagnostics
  • Includes connecting tube and protective boot
  • Also available (sold separately):
    - Invacare XPO2 Portable Oxygen Concentrator (Code XPO100B)

Component Identification:

Invacare Check O2 Plus Oxygen Analyzer  A. LCD Display
B. Mode Button
C. On/Off Button
D. Gas Sample Inlet
E. Gas Sample Outlet
F. Battery Door

Click Here For User Manual

More On Check O2 Plus Analyzer

Oxygen, Flow and Pressure Measurement:

To check oxygen concentration, flow and pressure of a gas sample from a concentrator:
  1. Connect the gas sample tubing to the gas sample inlet of the Check O2 Plus.
  2. Attach the other end of the gas sample tubing to the oxygen concentrator.
  3. Initiate the flow of gas to the Check O2 Plus at a rate of 1-10 liters per minute (2 liters per minute is recommended). Ensure the concentrator output is stable.
  4. Turn on the Check O2 Plus.
  5. Allow the oxygen reading to stabilize for approximately 10 seconds before reading the oxygen concentration and flow.
  6. To check pressure, cover the gas sample outlet with thumb or finger while gas is flowing.
  7. Wait 5 seconds for the display to read pressure.

Switching Pressure Units of Measure:

The Check O2 Plus can measure pressure in PSI or kPa. The Check O2 Plus is factory set to measure in PSI. To switch to kPa:
  1. Using a #1 Phillips screwdriver loosen the battery door screw and remove the battery door.
  2. Toggle the switch inside the battery compartment.
  3. Replace the battery door and tighten the battery door screw.

Cleaning Instruction:

Wipe down the exterior surfaces of the Check O2 Plus with a moist cloth and mild hand or dish soap (pH 6–8).

Specification

ParticularsIRC450
Flow Measurement Range0 to 10 LPM
Pressure Measurement Range0.5 to 50 PSI
Oxygen Measurement Range21% to 95.6%
Operating Temperature Range59°F to 104° F (15°C to 40°C)
Product Weight6.4 oz

Warranty

3 year limited warranty

Customer Reviews

Questions & Answers


 
 
question image
How do I change batterries
Sean Kinsella - 7/28/2016 11:34:04 AM
facebooktwittergplus
answer image
 
Battery Replacement Procedure
Batteries should be changed when the icon illuminates. The icon will remain lit until the batteries are changed. If the battery power level is too low the Check O2 Plus will not power on until the batteries are changed.
  • Phillips screwdriver loosen the battery door screw and remove the battery door 
  • Remove the batteries.
  • Insert new batteries ensuring correct polarity. DO NOT use rechargeable batteries.
  • Replace the battery door and tighten the battery door screw.
  • If the Check O2 Plus does not power on when done verify the batteries are installed correctly and that the batteries are fresh
Customer Care - 7/29/2016 1:01:13 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close