InTENSity Twin Stim III TENS and EMS Combination Unit
InTENSity Twin Stim III TENS and EMS Combination Unit

InTENSity Twin Stim III TENS and EMS Combination Unit

Brand/Manufacturer: NORTH COAST MEDICAL
Authorized Retailer Badge

InTENSity Twin Stim III TENS and EMS Combination Unit combines TENS and EMS therapy in one portable and easy-to-use digital device for pain management. When operating in TENS mode the unit has four modes and three modes when operating in EMS mode.

Item #DescPkgRewardPrice 
DI3717 4.5" x 2.55" x 0.9" Each $2.50


  •  InTENSity Twin Stim III TENS and EMS Combination Unit includes:
    - A Carrying Case
    - Two sets of lead wires
    - 9-volt battery
    - AC adaptor
    - Manual
    - One year warranty
    - Pack of four self-adhesive reusable electrodes
  • Four modes of TENS therapy: Burst, Normal, Mod 1 and Mod 2
  • Three modes of EMS therapy: Synchronous, Asynchronous and Delay
  • Power Source: Standard 9-volt battery or AC adaptor
  • Output Voltage: Constant Current
  • Current; 0-105 mA
  • Timer 1-60 Constant
  • Pulse Width: 50-300 µs
  • Pulse Rate 1-150 Hz
  • Wave Form for TENS: Monophasic Square 
  • Wave Form for EMS: Biphasic
  • Click Here For Quick Reference Guide

More Information

  • Indication For Use
    The TENS mode is often prescribed for:
    - Symptomatic relief of chronic pain
    - Post-traumatic pain
    - Post-surgical pain
    The EMS mode is often prescribed for:
    - Relaxation of muscle spasms Increase of blood flow circulation
    - Prevention of disuse atrophy Muscle re-education
    - Maintaining or increasing range of motion
    - Immediate post-surgical stimulation of lower leg muscles to prevent venous thrombosis
    Note: Do not use this device for undiagnosed pain syndromes until consulting a physician.
  • Instructions For Use 
    - Press arrow and slide battery compartment cover open.
    - Insert 9V battery, matching the + and – ends to those in unit
    - Firmly insert the end of the lead wire pin into the electrode connectors
    - Make sure no bare metal of the pins are exposed
    - This unit operates with one or two sets of electrodes
    - When using one set, plug lead wire into Channel 1 on top of the unit
    - Use Channel 2 to operate a second set if directed by your healthcare provider
    - Remove electrodes from protective backing
    - Keep backing to properly store electrodes after use
    - Apply electrodes to the exact site indicated by your doctor or therapist.
    - Skin at the application site should be clean and dry
    - There are 2 therapeutic modes available: TENS and EMS.
    - Press the M button and continue to press until you have advanced to your desired therapeutic mode.
    Note: Consult your physician for your suitable therapeutic mode
  • Handling: The gas generated at the time of processing may irritate the respiratory organs and skin. And when inhaled in large amount, vomiting and headaches may occur in certain individuals. Thus, avoid inhalation of such gases. In the case of mechanical processing (cutting, sanding, etc.), the fine dust generated by crushing may cause dust explosion by the static electricity and electrical sparks that are generated. Thus, aim at keeping the work place clean so that dust will not accumulate
  • Storage: Store in a place which is not exposed to the direct rays of the sun, and keep away from heat or ignition sources
  • Potential Health Effects
    - Eye: Dust and process vapors may irritate eyes
    - Skin: Exposure to molten resin may cause thermal burns
    - Inhalation: Dust and process vapors may cause respiratory tract irritation.
  • Caution: This is a Class II Medical Device. Federal law restricts these devices to sale by or on the order of a licensed health care professional.


One year warranty

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using