Hoyer Classics Hydraulic Manual Patient Lift

Hoyer Classics Patient Lift Features

• Hoyer Classics Hydraulic Manual Patient Lift has contemporary painted design
• Pump handle rotates, allowing operation from either side of lifter
• Disassembles for easy storage
• Adjustable, allowing for easier transport through tight spots or corners
• Adjustable u-base can also be used to widen the lift for easier access to bedside commodes or wheelchairs
• Allows for lifting from the floor and the easy adjust legs lock securely into position for added stability
• Perfect solution for hospitals, nursing homes, and home care facilities
• Safe Working Load 400lbs
• Maximum Height to Attachment Point 62.2"
• Legs Open Inside Dimension 38"
• Legs Closed Outside Dimension 25.5"
• Overall Height of Legs 4.75"
• Base Opening - Hand Operated

What to buy with Manual Patient Lift?

• Hoyer Digital Scale
• Hoyer Classics Four-Point Universal Padded U-Sling
• Hoyer Classics Four-Point One Piece Sling with Positioning Strap

How to use Hoyer Hydraulic Lift?

1. Tighten hydraulic pressure release knob by turning it clockwise. Release knob is located on pump near pump handle. Base of lifter must be spread to widest possible position to maximize stability.
2. Pump hydraulic handle. Do not lock rear casters. If needed, lifter base will move slightly to adjust for balance.

1. Open hydraulic pressure release knob by turning it counter-clockwise, not more than one full turn.
2. Guide descent. Push gently on knees to attain correct sitting posture while lowering.
3. After patient reaches seat, push down on boom to slacken chains.