Homecraft Raised Toilet Seat with Arms

How to install Homecraft Toilet Seat?

Before installing the raised toilet seat, decide on the required position of the seat. The seat has three positions to provide the most appropriate position and comfort for the user. The ideal seat height is when the user’s feet can completely touch the floor, and the hip height is higher than the knee height i.e. less than 90 degrees on the knee joint or hip joint.
 

1. Flip up the raised toilet seat for easier access to the adjustment bars
2. The adjustment cross bar adjusts in width for each seat position. There are three holes at each side of the cross bar to adjust the width. For the 60mm height, insert the e-clips into both inner holes of the front bar. For the 100mm height, insert the e-clips into both middle holes of the front bar. For the 150mm height, insert the e-clips into both outer holes of the front bar.
3. Remove the e-clips from the cross bar and confirm the correct width for each seat position
4. Once confirmed, push the e-clips back into the cross bar
5. Insert the cross bar under the seat and locate the ends of the cross bar into the locators until they are secure
6. Remove both black knobs at the rear sides of the raised toilet seat
7. Position the rear bar at the same height of the front bar. For the 60mm height, set both bars at the top locators. For the 100mm height, set both bars to the middle locators. For the 150mm height, set both bars at the bottom locators.
8. Insert both black knobs back through the holes, aligning with the holes of the rear bar and tighten until firm

Install the Homecraft raised toilet seat:

9. Seats are generally attached by a pair of bolts/nuts located under the rear rim of the toilet seat. Unscrew and remove the existing fixings to remove the original toilet seat
10. Ensure the toilet is clean before installing the raised toilet seat with armrests
11. Unscrew the remove the long plastic nuts from the rear of the raised toilet seat with armrests
12. Utilising the holes at the rear of the toilet basin, insert the rear securing bolts. Ensure the seat is centred over the toilet basin
13. Once the securing bolts are in position, thread the plastic nut into position with the smooth side facing upwards
14. Screw the white plastic securing nuts and tighten until secure

Install the armrests into the Homecraft raised toilet seat:

15. With the armrest in the downward position and whilst pushing down on the plastic push pin, align one of the armrests into the hole at the side of the seat and insert the armrest
16. Once the armrest has been inserted fully, rotate the armrest until its normal resting position
17. The metal stopper on the rest should be resting on the plastic ledge of the toilet seat. This provides additional stability and strength. Ensure the armrests are stable and secure before each use.
18. Repeat this process on the other side of the seat to complete the installation

Homecraft Raised Toilet Seat with Arms User Manual

How to care and clean Homecraft Adjustable Raised Toilet Seat?

• To clean the raised toilet seat with armrests, wipe with a mild soap and warm water solution
• Rinse well and then dry thoroughly with a clean, dry cloth
• For heavier soiling, wipe clean with a diluted disinfectant solution and rinse well before drying thoroughly
• Do not use water with a temperature in excess of 80°C
• Do not use high pressure cleaners, steam cleaners or harsh, abrasive cleaning solutions

Specifications of Raised Toilet Seat with Armrests

Customer Reviews