Harmar AL600 Hybrid Platform Lift Features
- Harmar AL600 includes:
- Easy-turn handles
- Weight-distributing handle bar for easy removal and replacement
- Ideal for minivans and SUVs due to greater extension capability of the platform
- Ultra-compact, patented design fits more applications
- Accommodates virtually all scooters and power chairs
- Drive on/off platform
- No drilling required on most applications
- Connects to existing third row seat hardware, saves second row seating
- No scooter or chair modifications required
- Only 31" cargo headroom and just 43" of depth required
- Emergency manual override system
- Manual crank backup
- Weatherproof remote hand control
- Extremely easy to use
- Compatible with most minivans and SUVs
- To complete this order we would also require your vehicle information (vehicle;s year, make, model) and mobility equipment information (wheelchair/power chair/scooter manufacturer, model etc.) We will call you for the same
How To Operate Harmar AL600?
Loading & Securing Chair Lower the Lift Platform. Using your remote control, lower the lift platform until it reaches the ground and becomes level. Do Not over-lower to the point where the vehicle begins to rise or the platform rises with the "DOWN" button pressed. This will damage the lift or cause the lifting system to back drive.
- Drive Chair/Scooter onto Platform: Set your chair or scooter’s speed control to slow speed to maneuver easily onto the platform. You can drive onto the platform from either side.
- Secure the Chair: Each corner of the Harmar AL600 platform has a restraint attached, with a hook on the end. Place each hook in either the anchor plate slot or in each U-bolt. Pull the loose end of each restraint tight. To release, simply press the release tab and remove the hooks.
- Fold Seat Backs: If your chair has a folding seat back, you may want to place it in the down position for easier clearance when loading the chair into the vehicle. Depending on the size of your chair, you may need to remove the headrest as well.
- Raise the Chair: Double-check that the chair is secured properly on the platform. While holding the hand control, stand to the side and away from the lift. Press the "UP" button.
The platform will rise and retract into the vehicle. When the platform stops retracting release the button. The platform will automatically lock itself into travel position. Close the door slowly, making sure that no part of the chair or other objects in the cargo area contact the door.
Harmar AL600 Hybrid Platform Lift Specification
Particulars | Dimensions |
Lifting Capacity | 350 lb |
Headroom Required | 32" |
Depth Required | 43" Minimum |
Platform Height | 5.5" Maximum |
Vertical Reach | 33.5" |
Platform Size | 28.5" x 38" |
Adjustable Cradle Extends | 50" |
| Installed Weight | 116 lb |
Warranty
3 year transferable warranty Questions & Answers
 | ItemQuestion ItemName - now |
|
Your question will show here once it will get approved. |
 | UserAnswer UserName - now Your Answer will show here once it will get approved. |
|
| Can you tell me if it would work in a Chevy equinoxes with a quantum Q6 edge wheelchair Tanner Trish - 5/17/2016 8:35:11 PM | | |
 | Customer Care - 5/18/2016 1:40:31 AM |
|
| Will it fit in a 2013 Nissan Quest? Frank A Emrick - 8/5/2015 5:41:55 PM | | |
|
Yes the vehicle and the lift is compatible but I would need to know what type of power chair or scooter you would be using to determine whether everything will work together.
Currently I would say the AL600 with BA10R1. Customer Service - 8/12/2015 3:56:13 AM |
|
| can you please tell me if lifts are covered by insurance (Humana) it bought me my scooter. perry evans - 7/27/2015 2:37:44 PM | | |
| Thank you for reaching out to us.
Sorry, we do not deal with Product Insurance or Medicare, kindly contact manufacturer directly. Hope it helps. Customer Service - 7/30/2015 3:53:04 AM |
|
