Greenmont EasyPushbar Commercial Security Version Wheelchair Handle

Why Choose Greenmont F3362 Easy Pushbar?

• Ease of maneuvering that is can be push with one hand
• It increases the height of the push handles by 4 inches
• Expands from 15.5” to 24”
• The bar is made from aluminum and is capable of supporting up to 250 pounds
• Secures safely and protects from theft
• Designed to be used primarily in institutions or nursing facilities
• Ergonomically correct manner
• Securely fastens in seconds
• Compact for storage or transport
• Allows the use of cell phone, to carry a handbag or pull a luggage bag
• Easy to attach to most manual wheelchairs or transfer chairs
• Makes pushing a wheelchair easier even on uneven surfaces, steep inclines, carpets, or soft ground
• The center push bar is covered by durable overmolded ABS plastic
• This push bar is an easily attachable bar designed to reduce the effort of pushing a wheelchair
• Reduces or eliminates the need to bend over in order to push a wheelchair
• Note: Not intended for use on wheelchairs with hand brakes

How EasyPushbar for Wheelchair Handle Works?

The Greenmont EasyPushbar easily attaches to the wheelchair's handles and creates a single push handle that is about the comfort height of a typical shopping cart and lets a pusher stand straighter and have better control. Helping to reduce neck, shoulder, back, and wrist strain and fatigue, the EasyPushbar permits one-handed control, easier curb and ramp maneuvers, and is fully adjustable from 15-1/2" to 24" to fit most wheelchairs.

The commercial version locks onto the wheelchair with a special control key. Easy to attach to most manual wheelchairs or transfer chairs, the Greenmont EasyPushbar adjusts from 15.5" to 24", supports 250 lbs and securely fastens in seconds. You will love maneuvering your patient or loved one in an ergonomically correct manner and more upright fashion.

What to Buy with EasyPushbar Commercial Security Version?

• Cardinal Health Offset Adjustable Height Cane
• PVI Portable SingleFold Ramp
• Essential Medical Fleece Covered Wheelchair Foam Cushion

How to use Greenmont EasyPushbar?

Parts Included:

• Pushbar
• Clamps
• Lock Screws
• Metal L Bar
• Clamp Bolt
• Men Wrench

Step 1: Attaching Handle Clamp to Metal L Bar

• Insert the handle clamp into the metal L bar
• Push the bar as far into the handle clamp as possible
• Lock the assembly by tightening the lock-screw using the alien wrench provided
• Repeat for the second handle clamp

Step 2: Attaching PushBar to wheelchair handgrips

• Slightly loosen the lock screws on the pushbar so that the metal L bar slides easily in and out
• Attach one handle clamp to one hand grip of the wheelchair
• Adjust the width of the pushbar to fit the wheelchair by sliding the metal I bars in and out of the pushbar
• Attach the other handle clamp to the other wheelchair hand grip
• Tighten both handle clamps using the clamp screws using the alien wrench provided
• Center the pushbar and then lock in place by tightening the two lock screws on the pushbar