Graham field John Bunn Neb-u-Tyke Bella Butterfly Nebulizer

Neb-u-Tyke Bella Butterfly Nebulizer Features

• Reliable, piston-driven compressor‚ 
• Child-friendly design complete with stickers to personalize during aerosol treatment‚ 
• Convenient and compact design for easy transport and storage‚ 
• Comes complete with Nebulizer Accessory Kit
• Designed with an attractive butterfly shape and colorful stickers to personalize
• Bella Butterfly will keep child relaxed and entertained during aerosol treatment.‚ 
• Offer innovation, performance, and value for both patients and providers

Bella Butterfly Nebulizer Guides

• Graham field John Bunn Neb-u-Tyke Bella Butterfly Nebulizer User Manual
• Nebulizer Compatibility Guide

How To Use Neb-u-Tyke Bella Butterfly Nebulizer?

1. Before each use, inspect the compressor and nebulizer cup assembly for damage or wear; replace as needed.
2. Place the compressor on a table or other flat stable surface (not on the floor), in an area that is clean and dust-free. Be sure to easily reach the controls when seated.
3. Open the nebulizer medication cup: Twist the cap counter-clockwise until it stops, then lift cap off.
4. Pour the prescribed medication into the nebulizer medication cup. Do not fill with more than 5 ml per treatment.
5. Install cap on cup. Turn clockwise to tighten.
6. If using the mouthpiece for treatment, proceed to step 7 If using a mask, install the bottom part of the mask directly onto the top of the nebulizer medication cup cap as shown at right. Proceed to step 8.
7. Install mouthpiece onto top of nebulizer medication cup cap
8. Connect the tubing to the adapter on the bottom of the nebulizer medication cup.
9. Connect the tubing''s other end to the compressor air outlet connector.
    

Maintenance: Cleaning the Compressors Outer Case

• Wipe the compressors outer case with a clean, damp cloth weekly to keep it dust-free. Do not use any powdered cleaners or soap.

Cleaning the Nebulizer Cup

• Before each use, inspect the compressor and nebulizer cup assembly for damage or wear replace as needed
• Place the compressor on a table or other flat stable surface (not on the floor), in an area that is clean and dust-free. Be sure to easily reach the controls when seated
• Open the nebulizer medication cup: Twist the cap counter-clockwise until it stops, then lift cap off
• Pour the prescribed medication into the nebulizer medication cup. Do not fill with more than 5 ml per treatment
• Install cap on cup. Turn clockwise to tighten
• If using a mask, install the bottom part of the mask directly onto the top of the nebulizer medication cup cap
• Install mouthpiece onto top of nebulizer medication cup cap
• Connect the tubing to the adapter on the bottom of the nebulizer medication cup
• Connect the tubings other end to the compressor air outlet connector