Graham-Field John Bunn Handheld Pulse Oximeter
Graham-Field John Bunn Handheld Pulse Oximeter

Graham-Field John Bunn Handheld Pulse Oximeter

Graham-Field John Bunn Handheld Pulse Oximeter delivers quick and reliable pulse oximetry spot-checking for multiple environments including physician offices, EMS, hospitals, outpatient clinics and home healthcare. With an easy-to-read display, compact design and accurate assessments for SpO2 and Pulse Rate for both pediatric and adult patients. Ideal for all portable monitoring needs.

Item #DescPkgRewardPrice 
JB3000 4.3"L x 1.4"W x 1"H Each $2.06
$255.99
$205.99

Features

  • Graham-Field John Bunn Handheld Pulse Oximeter has easy-to-read color LED display
  • Durable compact design is lightweight and can fit comfortably in the hand
  • Display SpO2 , Pulse Rate, Perfusion Index, Plethysmogram and Pulse Bar
  • Monitors patients ranging from neonate to adult
  • Stores data for up to 10 different patients and 72 hours
  • Simple On or Off control with auto shutoff to conserve battery life
  • Audible and visual alarm, battery-low indicator
  • Easy data transmission to computer
  • Alarm:
    - Alarm SpO2
    - PR
    - Probe Off
    - Battery-Low Indicator
    - Audible & Visual Modes
  • Memory
    - 72 hour data storage, up to 10 patients
  • Click Here For User Manual

More Information

  • Warning
    - Please read this manual carefully before using this device. The operator must ensure that the equipment functions safely and is in proper working condition before being used
    - The Pulse Oximeter contains no serviceable parts. Do not disassemble. Only authorized personnel may perform service or adjustments on this device
    - When connecting this monitor to any instrument, verify proper operation before clinical use. Refer to the instrument’s operation manual for full instructions
    - Sensor malfunction may cause inaccurate data, possibly resulting in patient injury or death — pay close attention to the sensor and inspect it often
    - Optional worn-out data cables may cause inaccurate data, so if the data is used as a reference to treat a patient, pay special attention to data cable and check it more frequently
    - Do not tangle the oximeter cable with ES (Electrosurgery) equipment wires
    - Do not reuse single-use accessories
  • Oximeter setup
    - The oximeter can be powered by two AA alkaline batteries, which will typically provide 50 hours of normal operation, or by optional rechargeable batteries
    - When battery power is lower than 2.4V, Replace the batteries
    - Ensure the batteries are inserted with the correct polarity, as indicated by polarity marking (+ and -) inside the battery compartment
    - Connect the oximeter sensor to the top of the oximeter  
    - Ensure that the sensor is firmly plugged in

Specification

ParticularSpecifications
User ApplicationAdults and Pediatrics
Weight3.9oz with alkaline batteries

SpO2

Measurement Range70 - 99% SpO2
SpO2 Measurement80 - 99% ±2%
Accuracy70% - 79 % : ±3% <70% unspecified
Resolution1%

Pulse Rate

Measurement range30 - 254 beats per minute (BPM)
Pulse Rate Measurement Accuracy±2 bpm or ±2%
Resolution1bpm
Power RequirementsType 2 AA alkaline batteries
Operation Time50 hours for normal operation

Display

Parameters DisplayedSpO2, PR, PI, Plethysmogram, Pulse Bar
Display Modes3
BrightnessAdjustable 10 levels

Environmental

Operation Temperature 5°C - 40°C
Storage Temperature20°C - 70°C
Operation Humidity15%RH - 95%RH
Storage Humidity10%RH - 95%RH

Warranty

GF Health Products, Inc. (GF) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance. To the extent that a component is warranted by a third party, GF conveys all of its rights under that warranty to the original purchaser, to the extent permitted. This limited warranty shall only apply to defects that are reported to GF’s customer service team within the applicable warranty period and which, upon examination by GF or its authorized representative, prove to be a warranty item. This limited warranty is not transferable. The warranted components and time period are set forth below:
Oximeter:................2 years warranty
Sensor: .................... 1 year warranty
Accessories:........... 6 months warranty
The applicable warranty period shall commence from date of shipment to the original customer, unless there is an expiration date on the component in which case the warranty shall expire on the earlier of warranty period or the expiration date. The warranty does not extend to non-durable parts and does not include labor or costs of shipping. The warranty is void if the defect is caused by any other reason not related to defects in materials or workmanship.

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close