Drive Ventura Three Wheel Standard Scooter
Drive Ventura Three Wheel Standard Scooter

Drive Ventura Three Wheel Standard Scooter

Brand/Manufacturer: DRIVE MEDICAL
Save
Authorized Retailer Badge

Drive Ventura Three Wheel Standard Scooter offers maneuverability for nimbly negotiating indoor obstacles. It comes equipped with removable armrests which are height and width adjustable. Adjustable angle, delta tiller lets the user to place the controls in the most comfortable position. Ventura 3-Wheel Scooter has ergonomic controls that make it easier for users with limited strength or dexterity to operate the scooter.

Item #DescPkgRewardPrice 
VENTURA318FS 18" Folding Seat Each $27.92
$1846.99
$1395.99

Drive Ventura 3-Wheel Standard Scooter

  • Includes interchangeable color panels in Red and Blue
  • Seat position can be adjusted forward or backward
  • Height-adjustable swivel seat with fold-down backrest
  • Armrests are padded and adjustable
  • Floorboard with 23” of foot space
  • Ergonomic throttle control
  • Flat-free, non-marking tires
  • Easy-to-adjust tiller
  • Anti-tip wheels
  • Rear suspension
  • Programmable controller
  • Large, plastic carry basket
  • Easy Disassembling Frame
  • Headlight
  • Delta tiller
  • Easy freewheel operation

More On Ventura 3-Wheel Standard Scooter

Assembling Instructions:

Assembling Instructions 1. Remove your scooter from its packaging. Loosen the tiller adjustment knob, raise the tiller to the desired angle and retighten the knob.
 
Assembling Instructions 2. By hand, loosen the two knobs that secure the rear shroud to the base of the scooter.
 
Assembling Instructions 3. Lift up on the shroud to remove.
 
Assembling Instructions 4. Connect the red connector on the battery harness to the matching red connector on the main cable.
 
Assembling Instructions 5. Replace the rear shroud and reinstall the two knobs removed in Step 2.
 
Assembling Instructions 6. While lifting up on the seat release lever, place the seat onto the seat post. Release the lever and rotate the seat until it locks into place.
 
Assembling Instructions 7. Insert the armrests into the attachment points in the seat frame so that the armrests face forward.
 
Assembling Instructions 8. Attach the front basket by aligning the bracket on the tiller with the mounting holes on the basket. Then push down to secure in place.
 
Assembling Instructions 9. Fully charge the scooter batteries by inserting the round charger connector into the charging terminal on the scooter tiller. Then insert the 3-pronged plug into a standard electrical outlet. Be sure to charge the scooter for 8-10 hours before first time use.
 
Assembling Instructions 10. Before use, make sure that the yellow freewheel mode lever of scooter is in the “drive” position.

Operating Ventura Scooter:

  • After your scooter is assembled, and adjustments have been made you are now ready to operate your scooter.
  • The key switch applies power to the control system electronics, which in turn supplies power to the motors. Turn the key switch with the key inserted to turn on your scooter.
  • It is recommended you start at the slowest speed setting when familiarizing yourself with your scooter controls. Once you feel comfortable with the controls, and movement of the scooter you may then increase the speed.
  • Rotate the speed knob to the lowest speed setting. Engage the throttle, and begin steering to drive forward, backward, left or right.
  • If you want to stop the scooter, release the throttle and it will automatically return to the center position to stop the unit.
  • Once familiar with the controls rotate the speed knob to increase the top speed to a comfortable setting.
  • When the scooter is turned on, the battery gauge will display red, orange, and green indicators: - Red: Your scooter should be charged as soon as possible.
    - Orange: Do not drive your scooter for a long trip.
    - Green: Your scooter has full battery capacity.

Cleaning Instructions:

  • To clean your scooter, use a damp cloth with a mild, non-abrasive cleaner on the plastic and metal parts
  • If necessary, clean your scooter with an approved disinfectant safe for use on your unit
  • Never hose off your scooter or expose it to direct contact with water
  • Never use any chemicals on the upholstery of your seat, this may cause the seat to dry out and crack

Ventura 3-Wheel Standard Scooter Specifications

ParticularsSpecifications
Top Speed4mph
Top Range16 miles
Turning Radius53"
Climbing Angle7.5 degrees
Ground Clearance2.5"
Dimensions48" x 24.75"
Floor to Seat Height21.5" to 23.5"
Seat Dimensions18"W x 16"D x 13.5"H
ControllerPG S-Drive 70A
Motor/Drive System24v x 350W x 5100RPM
Charger4A off board
BrakesElectromagnetic
Front Wheels10" x 3" flat free
Rear Wheels10" x 3" flat free
Base Weight88lb
Battery Weight28lb
Seat Weight26lb
Total Weight142lb
Weight Capacity400lb

Warranty

Warranty on Frame: Lifetime
Warranty on Electronic Controller/Drive Train Components: 14 Months
Warranty on Batteries: 12 Months

Customer Reviews

Questions & Answers


 
 

Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
question image
How to do the seat swivel adjustment?
ROBERT - 5/1/2017 12:21:10 AM
facebooktwittergplus
answer image
The seat can be rotated and locked in position at 45 degree intervals. Lift up on the handle under the seat and turn the seat to the desired position, releasing the handle to lock the seat in place.
Customer Care - 5/1/2017 8:52:43 AM
question image
What if my scooter comes in contact with moisture?
LILY - 5/1/2017 12:20:08 AM
facebooktwittergplus
answer image
Should your Ventura Standard come in contact with water or moisture, dry your scooter thoroughly with a towel. Allow your scooter to sit in a dry place for 8 to 12 hours to allow unseen moisture to evaporate. Check the throttle operation and brakes before using your scooter again.
Customer Care - 5/1/2017 8:50:39 AM
question image
What charging pattern should I follow?
JACKSON - 5/1/2017 12:19:33 AM
facebooktwittergplus
answer image
To ensure maximum life from your batteries, and continued use of your Drive Ventura Standard Scooter please follow these charging guidelines based on your usage:
• If you use your scooter on a daily basis, charge the batteries as soon as you are finished with the day’s activities, and leave it on the charge until you are ready to use the following day. 
• If you use your scooter infrequently, charge the batteries once a week for 10 to 14 hours.
Customer Care - 5/1/2017 8:49:19 AM
question image
How should I charge the scooter?
ANNIE - 5/1/2017 12:18:26 AM
facebooktwittergplus
answer image
To charge Drive Ventura Standard Scooter, position the front of the unit next to a standard electrical outlet. Be certain the freewheel levers are engaged, and the power is turned off. Plug the charger into the scooter, and then into the electrical outlet. When the batteries are fully charged remove the charger from the scooter.
Customer Care - 5/1/2017 8:46:14 AM
question image
can this scooter be disassembled for travel
Roberta cockcroft - 3/4/2017 12:32:58 PM
facebooktwittergplus
answer image
AS per manufacturer, do not modify, remove, disable, or add any parts, features, or functions on your Drive Ventura Three Wheel Standard Scooter. 
Disassembling the controller, motor, or charger by anyone other than an authorized Drive Medical service agent is prohibited, and voids any applicable warranty.
Customer Care - 3/6/2017 1:54:56 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close