Drive Deluxe Hip-High Wood Frame Chair
Drive Deluxe Hip-High Wood Frame Chair

Drive Deluxe Hip-High Wood Frame Chair

Brand/Manufacturer: DRIVE MEDICAL
Authorized Retailer Badge

Drive Deluxe Hip-High Wood Frame Chair has designed for post-hip surgery residents and is constructed of solid maple hardwood, not a plywood veneer. Drive Hip-High Wood Chair features an attractive vinyl seat with soft, comfortable and water resistant backrest. The square armrests make sitting down or pushing up to get out from the chair safe and easy. The footrest is adjustable to provide maximum comfort and an ideal ergonomic fit.

Drive Deluxe Hip-High Wood Frame Chair Highlights:

  • Attractive vinyl seat
  • Solid maple hardwood
  • Sitting without bending
  • Three height adjustments footrest

Item #DescPkgRewardPrice 
17100 25"D x 24"W x 40"H Each $23.10


  • 3 footrest height adjustments
  • Provides sitting without bending at the hip
  • Strong and durable for years of trouble-free service
  • Instruction Manual

More Information

Operating instructions:
  • Remove the frame and seat assembly from the carton. Stand chair upright on all four legs.
  • Remove the (4) Phillips screws holding the seat to the bottom side of the frame, taking care to support the seat so it does not fall when the screws are removed.
  • Position the seat on the topside of the frame making sure the seat faces forward to the footrest support on the bottom front of the frame.
  • Reinsert the (4) Phillips screws through the bottom of the frame into the bottom of the seat. Be sure to use the long screws in the front of the seat and the short screws in the rear of the seat. Take care to start all (4) screws by hand before tightening them with the screwdriver. (Failure to start the screws by hand can cause permanent damage to the seat assembly)
  • Remove the (2) Phillips screws holding the armrest to the bottom side of the chair arm. Reposition the armrest to the topside of the chair arm and install the (2) screws by hand before tightening them with the screwdriver. Repeat the armrest installation on the other arm.
  • The Drive Hip-High Chair features an adjustable height footrest. To install, position the footrest with the rounded corners facing outward and the square corners facing under the chair. Position the wooden dowels on the footrest into the desired height setting until the footrest is flush with the chair. Install the (4) screws provided (2 per side) into the holes provided in the back of the chair rail. Tighten all 4 screws into the footrest.
  • Check all hardware periodically for tightness
  • This product has a maximum user weight limitation of 300 lbs.
  • Drive Medical assumes no responsibility for any damage or injury caused by improper installations, assembly, or use of this product.
  • If components are missing or damaged, please contact your dealer immediately.
  • Do not use substitute parts!
  • NOTE: Do not use the chair until all the assembly steps have been completed

Warning WARNING: Cancer and Reproductive Harm –




Floor to seat height


Width Between Arms


Floor to Arm Height


Floor to Footrest Height (adjustable)

5.5", 7.5" and 9.5"

Overall Width


Overall Height


Overall Depth


Weight Limit

300 lbs


1 Year warranty on upholstery, 2 year limited warranty on frame

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
question image
What is the width and length of the seat?
Twila R Beasley - 8/7/2015 9:32:31 PM
answer image
Thank you for reaching out to us. The Length and Width of the seat for the 17100 Deluxe Hip-High Wood Frame Chair is going to be 18 3/4" W X 17 3/4" D.
Customer Service - 8/14/2015 4:24:19 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using