Drive Chrome Sport Full-Reclining Wheelchair

Drive Chrome Sport Full-Reclining Wheelchair

Brand/Manufacturer: DRIVE MEDICAL
Authorized Retailer Badge

Drive Chrome Sport Full-Reclining Wheelchair features a hydraulic reclining mechanism that allows for infinite adjustments up to 180°. The vinyl upholstery is comfortable, lightweight and easy-to-clean. The wheels are positioned at the back of the frame for additional stability. It also features arms that have support extension for reclining position.

Item #Seat WidthArmrestProduct Front Riggings
CS16RBDDA16"Detachable Desk ArmSwing-away Elevating Leg rests
CS16RBDFA16"Detachable Full ArmSwing-away Elevating Leg rests
CS18RBDDA18"Detachable Desk ArmSwing-away Elevating Leg rests
CS18RBDFA18"Detachable Full ArmSwing-away Elevating Leg rests
CS20RBDDA20"Detachable Desk ArmSwing-away Elevating Leg rests
CS20RBDFA20"Detachable Full ArmSwing-away Elevating Leg rests

Code - #CS20RBDFA is currently not available. You may look for other options.

Buy this product and earn $46 Reward Dollars.

Shipping Charges Applicable
  • ORDERING DETAILS
  • Seat Width x Seat Depth
  • Front Riggings
  • Armrest
  • Total: $599.99
    Total: $459.99
Total: $599.99
Total: $459.99

Features

  • Drive Chrome Sport Full-Reclining Wheelchair includes:
    - Swing-away elevating leg rests
    - Metal foot plates
    - Push-to-lock wheel locks
  • Added rigidity bar keeps the back from hammocking
  • Precision sealed wheel bearings in front and rear ensure long-lasting performance and reliability
  • Attractive chrome frame
  • Dual axle position for the rear Mag-Style wheels
  • Lightweight, maintenance-free, composite mag-style wheels
  • 8" front casters
  • Padded armrests provide added patient comfort
  • Rear anti-tippers standard
  • Headrest extension with cushioned head immobilizer standard
  • Click here for user manual

More Information

  • Caution
    Stability

    - Wheelchair is designed to be safe and stable as long as center of gravity is maintained while going about normal activities
    - Care must be taken while performing activities that shift your center of gravity in the chair
    - Never reach so far that require you to shift in the seat or bend over out of the chair
    - When you have to reach for objects that require you to lean, be certain front casters are pointing in a forward position that extends the wheelbase and will stabilize the chair
    Ramps
    - Be sure of your own capabilities, limitations, and strength before attempting to go up a ramp
    - Correct techniques on ramp negotiation should be shown to you by a qualified professional
    - Assistance is recommended when going up or down inclines greater than 10°
    - If you must stop on an incline, avoid sudden, abrupt movement when you resume movement
    - Because of backward angle of the chair, sudden abrupt movement could cause instability
    - Attempting to use the wheel lock brakes could result in accidental locking, tipping to one side, or cause a sudden stop. Avoid changing direction when going down an incline, as this could result in instability of tipping over
  • Use And Safety
    Wheel Locks

    - Engage both wheel locks before getting in or out of the chair, leaning forward in the chair, or while in an elevator or wheelchair lift. Proper adjustment of wheel lock is at least 1/8" when locked
    - Locks are engaged by pushing handle completely forward
    Tires
    - Solid rubber tires need minimal maintenance but should be cleaned occasionally with a damp cloth
    - Replace if tires become severely worn or cracking appears
    Front Casters
    - Casters should be checked periodically and lubricated occasionally
    - Lubricate by removing the fork and greasing caster stem bearings. Lubricate wheel bearings by removing wheel from fork
    Removal Of Swing-Away Foot Rests/Leg Rests
    - Release lock by pushing on the front rigging lever
    - Swingaway footrest /leg rest out and sideways. Lift to remove
    Adjusting Length Of Footrest/Leg Rest
    - When adjusting length of foot rests or leg rests, user should be sitting in wheelchair with feet on the foot plates
    - Loosen bolt on the clamp around support assembly
    Adjusting/Elevating Leg Rest
    - Lift foot plate on leg rest assembly to the desired position
    - Release leg rest assembly and it will automatically lock into place
    - To lower, push out on leg rest lever and lower foot plate to the desired position
    Wheels
    - Large rear wheels should be inspected at least once a month to ensure proper tightness
    - If wheel wobbles or is loose, release lock nut and tighten axle bolt slightly
    - Test for proper tightness by learning chair to one side and spin adjusted wheel
    General Care
    - Wipe chrome parts with a clean, soft cloth at least once a week. All metal parts can be cleaned with auto wax or similar products
    - If exposed to moisture, dry immediately
    - Do not use an abrasive cleanser that will scratch the finish
    To Open Chair
    - Open wheelchair by tilting to one side and pushing down on seat rail until fully opened
    To Close/Fold Chair
    - First, fold foot plates to vertical position
    - Grab the seat with both hands at front and back edge and lift. Or, tilt chair to one side and lift up on seat rail
    Removable Arms
    - Remove arms by depressing spring button and lifting arms out of front and rear sockets
  • Warning
    - This wheelchair has not been approved as a seat that can be used within vehicles of any kind
    - Do not operate this wheelchair on roadways, streets or any surfaces with vehicular traffic
    - Do not attempt to operate on inclines 10% or greater without proper assistance
    - Be sure to completely engage wheel locks when getting in and out of wheelchair or when in elevator or wheelchair lift
    - Wheelchair should be on a smooth, stable and level area with wheel locks engaged before transferring user in or out of wheelchair
    - Do not adjust footrests any lower than 2-1/2" from floor
    - When getting in or out of wheelchair, do not stand on or apply weight to foot rests
    - Before reaching or leaning forward, rotate casters to front of the wheelchair engage wheel locks to help prevent wheelchair from tipping over

Specification

ParticularsSpecification
Width Open with 16" Seat24"
Width Open with 18” Seat26"
Width Open with 20” Seat28"
Width Closed12"
Height51"
Seat-To-Floor Height18"/20"
Back Height (without | with headrest)22" | 32"
Seat Depth17"
Length with Riggings49"
Product Weight with 16” Seat56.63 lbs
Product Weight with 18” Seat57.63 lbs
Product Weight with 20” Seat58.63 lbs
Weight Limit with 16” Seat300 lbs
Weight Limit with 18” Seat300 lbs
Weight Limit with 20” Seat350 lbs

Warranty

Limited Lifetime Warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close
Add quote

{{VideoGallery[0].VideoName}}

  • video

Also Available

{{x.Name}}
${{ x.OurPrice | currency: "" : 2}}

Articles & news

Related Articles

{{x.Heading}}

{{x.ShortDescription}} ...

Questions & Answers



Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
question image
how much of a recline?
Mule - 4/22/2017 9:04:42 PM
answer image
The Drive Chrome Sport Full-Reclining Wheelchair's hydraulic reclining mechanism allows for infinite adjustments up to 180°
Customer Care - 4/24/2017 8:13:35 AM