DonJoy X-Act ROM Post-Op Elbow Brace

DonJoy X-Act ROM Elbow Brace Features

• Precise Protection: Single, lateral aluminum hinge design helps to maximize protection and minimizes brace weight. User friendly, preferred flexion ROM settings from -10º to 120º in 10º increments. Easy quick-lock allows for fixed/locked position from 0º to 90º in 15º increments.
• Custom Fit: All four cuffs telefit to size allowing for a more precise fit on any size patient— without impingement
• Swivel & Snap: Make it fit and make it fast with swivel action buckles that easily quick clip with one hand for a contoured fit
• Maximum Comfort Plush ComfortForm padding helps to maximize comfort for long-term wear

Benefits of X-Act ROM Elbow Brace

• Easy to adjust telefit sliders for quick length adjustment and customized, precise fit
• The X-Act Rom Elbow brace ships flat for quick and easy application. Anti-migration material is integrated into thermoformed pads.
• Easy, shape-to-fit malleable bicep and forearm cuffs contour to the anatomy for a custom fit and minimal application time.
• Snap-to-fit buckles allow for ideal adjustment with one hand
• Supination/Pronation accessory provides the wrist with static stretch.
• All four cuffs telefit to size for a more precise fit on any size patient
• Universal size fits most patients and provide elbow support

How to measure for X-Act Brace?

• Bicep Circumference: 8” to 21” (20.32cm to 53.34cm)
• Forearm Circumference: 6” to 18.5” (15.24cm to 47cm)

DonJoy X-Act Elbow Brace User Manual
 

What to buy with DonJoy Elbow Brace?

• Fabrication Point Relief ColdSpot Lotion Gel

How to Apply DonJoy X-Act Elbow Brace?

Applying Shoulder Sling

1. Unlock hinge: The X-Act Rom Elbow is packaged in a locked position. To unlock brace, slide Red Quick-Lock button away from hinge center.
2. Position Brace: Place the mid-point of hinge over lateral epicondyle (outside of elbow)
3. Telefit Arm lengths: While hinged is aligned with epicondyle (mid-point of elbow) adjust position of all four cuffs. Depress the slider button and position both forearm cuffs then both bicep cuffs to desired location.
4. Apply Brace: Unfasten the four Quick-Clip buckles on sliders by rotating the release end upward until clip is ejected off of slider. Place arm into brace.
   Starting with the cuffs closest to elbow, form cuffs around forearm and bicep.
5. Secure Straps: Starting at the wrist, click each of the Quick-Clip buckles onto the slider bar, making sure an “audible click” is achieved. Cinch Straps for snug fit.
6. Range of Motion hinge Setting: X-Act Elbow brace allows for full range of motion in 10 degree increments from -10 to 120 degrees of flexion. To adjust settings, depress the Flexion & Extension buttons and move to prescribed range of motion (ROM).
7. Quick-lock: To prevent any range of motion, slide the red Quick-Lock button to the locked postion. X-Act Elbow brace may be locked in 0, 15, 30, 45, 60, 75, or 90 degrees of flexion.
8. Patient Compliance: If required, lock ties are included with each brace. Loop a tie through hole in both the extension and flexion buttons to maintain prescribed range of motion settings.
9. Removal & Re-Application of X-Act Rom Elbow Brace: Slightly loosen straps on each cuff and disengage clip on sliders by rotating clip upward until clip is ejected off of slider. Loosen cuffs. Re-apply brace easily with one hand. Align hinge at Elbow. Form cuffs around arm for snug fit. Click buckles onto sliders. Tighten straps for proper fit.
10. Loosen both straps on Shoulder Sling, Place shoulder strap over head so strap sits on both shoulders, like a collar.
11. Place uninjured arm through Shoulder Sling, making sure one strap is across back. Shoulder strap should be over shoulder of injured arm.
12. Attach Shoulder Sling to brace by feeding wrist strap through buckle of Shoulder Sling. Wrap strap around wrist cuff and secure.
13. Move contact closure strap ends on Shoulder Sling to raise arm to comfortable position. Strap may be trimmed as needed. Position shoulder pad on neck area as needed for comfort.

How to clean Elbow Brace?

Remove and hand wash preformed cuff liners and brace straps in cold water with mild detergent. Rinse thoroughly. AIR DRY only, do not heat dry. Regular cleaning of the brace is recommended.