Devilbiss IntelliPAP Standard Plus Fixed Pressure CPAP System With SmartFlex Technology
Devilbiss IntelliPAP Standard Plus Fixed Pressure CPAP System With SmartFlex Technology

Devilbiss IntelliPAP Standard Plus Fixed Pressure CPAP System With SmartFlex Technology

Brand/Manufacturer: DEVILBISS
Authorized Retailer Badge
  • Prescription required
  • Made in USA

Devilbiss IntelliPAP Standard Plus Fixed Pressure CPAP System With SmartFlex Technology is designed for the effective treatment of Obstructive Sleep Apnea. Its robust ergonomic design and its small size make it the ideal travelling companion. This device offers patented SmartFlex technology which offers three comfort settings, with each setting equating to an exact 1 cm H20 drop in pressure upon exhalation.

Item #DescPkgPrice 
DV53D Without Heated Humidifier Each $569.99 $395.00
DV53D-HH With Heated Humidifier Each $689.99 $470.00

Give me a Better Price


More Information

  • Enhanced comfort and reporting:
    The IntelliPAP Standard Plus features DeVilbiss SmartFlex technology, which is a unique exhalation pressure relief function. The IntelliPAP Standard Plus includes expanded reporting capabilities through the on-board SmartCode Compliance Tracking and optional SmartLink Therapy Management System.
    - From its reliable electronics and waterresistant housing, to its durable Lexan humidifier chamber and stainless steel heat transfer plate, IntelliPAP is built for years of dependable performance and patient satisfaction.
  • Performance features:
    - Less than 1% failure rate and backed by the best-in-industry
    - Free remote tracking of compliance data through SmartCode technology
    - Optimal humidification, ramp delay and whisper-quiet operation, 26 dBA
    - Stacked design creates an exceptionally small footprint
  • Design:
    Exceptionally small footprint fits easily into the home environment and carry-on luggage
    - Discreet carry bag included that can be easily expanded to hold additional accessories
    - Humidifier reservoir is easy to remove and replace and includes built-in, overfill protection
    - Water ingress protection prevents humidifier water from damaging the CPAP, great for travelers
    - Patient air tubing extends from back of unit to reduce clutter and enhance visual appeal
    - Accommodates various tubing lengths (6 and 10 feet)
    - Large, slip-resistant pads on bottom of unit to minimize movement on night table during the night
    - Easy and intuitive set up – three, large buttons control nearly all functions for simplified patient operation
    - Large, backlit LCD and easy-to-follow patient menu
    - SmartCode compliance tracking encodes usage data that can be communicated to a clinician and then translated
    - Reminders alert to the need to replace or check parts
    - Extra air inlet and fine particle filter included
  • Humidifier chamber:
    - Overfill protection
    - Corrosive resistant, stainless steel plate
    - Unique baffling increases air water exchange for optimal humidity
    - 400ml capacity for 8 hours of use at the highest setting
  • SmartCode:
    - Encrypted usage data codes that can be communicated over the phone, e-mail, or text to generate compliance and clinical reports
  • Warning:
    - Do not attempt to fill the humidifier while it is attached to the humidifier cradle. Damage to the humidifier cradle may occur.
    - Never touch the heater plate on the humidifier cradle. Never touch the heat transfer plate on the bottom of the water chamber. These plates can reach temperatures as high as 149°F (65°C) during operation. Do not operate the heater if the water chamber is empty. The heater plate may be turned off using the keypad heater control when being used without water.
  • Caution:
    - Use only distilled water that is at room temperature. Do not add any medication or other additives to the water.
    - For proper operation, ensure the flow generator is OFF before inserting humidifier chamber.


Pressure Settings3-20 H20 cm
While Breathing ComplianceYes
Event DetectionYes
SmartFlex Exhale Pressure ReliefOff, 1, 2 or 3 cm H20  pressure relief

Inhale Rounding

Range: 0-5, increments of 1

Exhale Rounding

Range: 0-5, increments of 1
Automatic Leak CompensationYes
Remote Control CapabilitiesYes
Onboard Filter Clean ReminderYes
Onboard Compliance Quick CodeSmartCode
Therapy Management SoftwareSmartLink
Detailed Usage DataSmartLink
Data Transfer via Memory CardSmartLink
Remote Compliance Data RetrievalSmartCode
Remote Efficacy Data RetrievalSmartCode
Delay Pressure3 cm H20  to CPAP, increments of 0.5
Delay Time0 to 45 minutes in 5-minute increments
Auto ON and Auto OFFYes
Product Weight4.45 lbs with heated humidification system
Visual Mask Off AlertYes
Product Width6.5"
Product Length/Depth8.4"
Product Height6.4"


3 years warranty on IntelliPAP and on heated humidification system. 3 months warranty on humidifier chamber.

Customer Reviews

Questions & Answers

question image
Is this device dual voltage, will it work in the UK?
TF - 4/29/2017 11:09:24 PM
answer image
IntelliPAP is automatically capable of accepting line voltages of 100V to 240V – 50/60Hz
Customer Care - 5/5/2017 6:27:54 AM
question image
How to open water tank
Darla - 11/17/2015 9:11:00 PM
answer image
Thank you for reaching out to us. The Humidifier water chamber should be cleaned daily. 
1. Press on the chamber release latch and pull out the water chamber from the cradle 
2. Separate the chamber halves by pressing forward on the chamber disassembly lever and lifting the lid of the chamber. 
3. Remove the sealing gasket from the chamber lid
Customer Care - 11/18/2015 12:22:17 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using