Convaid Cruiser CX Pediatric Wheelchair - Transit Model

Convaid Cruiser Transit Wheelchair Features

• Customizable
• Quick-release rear wheels (CX10/12/14/16)
• Silver powder-coated frame
• Toggle wheel locks (CX18)
• Removable height-adjustable swing-away footplates
• Transit anchor brackets
• 2-Point positioning belt
• H-Harness with padded covers
• 3-Pt positioning belt w/depth adjustable crotch strap
• Seat depth growth of 5"
• Headrest extension
• 7.5 x 2" Front, 11.5 x 2.5" Rear solid tire (CX10/12/14/16)
• Tool-less upholstery removal
• One Piece height adjustable push handle (CX10/12/14/16)
• Tool-less adjustable seat depth
• Two Piece push handle (CX18)
• Tension adjustable back
• 8" Front, 11" Rear solid tire (CX18)
• Zippered pockets in seat & back upholstery (Cordura Only: CX10/12/14/16)
• Choice of cordura or textilene
• Foot-operated wheel lock (CX10/12/14/16)
• Made in USA

Convaid Cruiser Stroller Benefits

• Toolless upholstery removal
• Meets WC19 transport safety standards
• Added zippers on the seat bottom and back upholstery
• Under-seat storage baskets and side bags provide extra storage
• Lightweight & compact folding- Pediatric wheelchair folds like an umbrella stroller
• Textilene or Cordura upholstery that is removable, washable, and comes in a wide selection of colors

What to buy with Convaid Pediatric WheelChair

• Elkay Wheelchair Covers
• Senseez Pediatric Vibrating Pillows
• Skil-Care Pediatric Starry Night Gel-Foam Cushion

Intended Use

A person with physical disabilities who is frequently or permanently non-ambulatory

Tools Needed: 5/32” Allen wrench, 3/8” Wrench, 7/16” Wrench, Phillips Screwdriver

How to use Convaid Cruiser Pediatric Stroller?

Unfolding

1. Lay the chair flat on the ground and unbuckle the closure strap
2. Stand the chair on the front caster, grasp the side of the Push Handle, and push down on the Seat Tube
3. Press down firmly on the seat tubes to ensure the chair is completely unfolded
4. Using your foot, push down on the Lower Rear Lock Brace until it locks into a straight position
5. Press the grey buttons on each side of the Push Handle at the same time, and rotate the Push Handle to the desired height
6. Swing footplates down into position

Folding

1. Swing footplates to the side.
2. Press the grey buttons on each side of the Push Handle and rotate the Push Handle down completely
3. Unlock the Rear Lock Brace by kicking up on the center of the brace with the foot
4. Grasp one side of the Push Handle and pull up on the seat fabric or seat tube with the opposite hand
5. Lay the chair back onto the Push Handle. Push down on the tubing above the front tires until the chair is folded
6. Buckle closure strap

Convaid Cruiser Stroller Overview

1. One Piece Height Adjustable Push Handle
2. Chair Warning Label
3. Serial Number Label
4. Self-Tensio
5. Foot Operated Wheel Locks
6. 11.5* x 2.5" Rear Solid Quick Release Wheels
7. Transit Anchors Logo Sticker
8. 7.5* x 2" Front Solid Wheels
9. Height Adjustable Swing-Away Footplates
10. Transit Anchors

Suitable Environment

• Chair designed for indoor and outdoor use
• Wipe off excess rainwater with a soft cloth if used in the rain
• Clean chair if splashed with mud, salt water, or corrosive substances; reapply hypoallergenic and biodegradable lubricant to moving parts
• Avoid contact with seawater to prevent corrosion in inaccessible areas
• Clean wheels to remove dirt or mud before transitioning from outside to inside environments

Storage

Store the chair in a clean, dry area and avoid extended exposure to heat or moisture

Warnings

1. The chair is only intended to carry one user at a time
2. Do not carry more than one user at one time. The weight carried by the Cruiser chair must never exceed the total weight capacity of the chair. When using the chair in transit, all accessories must be removed from the chair and secured separately
3. To avoid tipping, do not hang the item from the push handle
4. To reduce the risk of an accident:
   • Always verify that quick-release axles are locked so that the back wheels do not come off
   • Always secure the user into the chair during use
   • Make sure that the chair operates properly. Repair any problems before use
   • Always watch for obstacles and avoid them as often as possible
   • Always carefully read the User Guide and get comfortable operating the chair
5. Do not go up or down stairs without the assistance of another person or with the user in the chair. If devices such as ramps or elevators are available, please use them. If they are not available, then the chair should be carried over the obstacle by two people without the user in the chair
6. Do not stand on the foot support when getting into or out of the chair
7. Positioning belts should never be used as a safety restraint device in a motor vehicle when transporting a chair with the occupant. An additional WC19 (ISO 7176-19) compliant automotive type seat belt is required when the chair is used in transport vehicles
8. During transit, a five-point harness should be used for occupants weighing less than 51 lbs.
9. Before removing the user from the chair and before returning the user to it, always engage the wheel locks. Never remove or place the user without engaging the wheel locks
10. Do not leave/store the chair in direct sun/heat over a long period. Check the temperature of the chair prior to usage

User Manuals

• Convaid Cruiser Users Guide
• Convaid Cruiser Product Sheet
• Tray Attachment Instructions For Cruiser
• Straps Adjustment of 5-Point Harness
• Instruction For One Piece Push Handle