Comfort Foot Double Foot Support With Leg Separator

Why choose Comfort Foot Double Foot Support With Leg Separator?

• The Comfort Company Foot Double Foot Support comes standard with Comfort-Tek Cover.
• Durable securing buckle and bolt-on option comes standard with all models.
• Unique heel cut-out eliminates contact with heel, prevents pressure points, and reduces risk of skin breakdown.
• Gel pack in foot support reduces pressure and heat build-up.
• Bolt on installation with securing buckle allows the Complete Feet to swing away for patient transfers.
• Medial lower limb separator keeps feet and legs positioned properly.
• Comfort-Tek Fabric:
  • Designed for infection control and as an incontinence barrier, this polyurethane material has a smooth and extremely soft top layer with a high-stretch polyester backing
  • Easily cleaned surface using most common disinfectants
  • Has stretch which helps alleviate pressure and conforms to both support pad and user

Comfort Foot Double Foot Support Installation Manual
 

What to buy with Comfort Foot Support

• Curve Wheelchair Cushion With Comfort-Tek Cover
• The Comfort Company Calf Protector
• The Comfort Company Headrest With Stretch-Air Cover

Also available (separately):

• Comfort Foot Double Foot Support Without Leg Separator
• Comfort Foot Double Tall Foot Support With Leg Separator
• Comfort Foot Double Tall Foot Support Without Leg Separator
• Comfort Foot Inferior Foot Support Pad - Base Only
• Comfort Foot Standard Posterior Support Pad Top Portion
• Comfort Foot Tall Posterior Support Pad Top Portion

How to apply Comfort Foot Double Bolt-On?

Parts Included:

• 2 - ¼-20 x 1” or ¼-20 x 1 ¼ ” Screws (dimensions vary depending on style of part)
• 2 - ¼ ” x 1 ¼ " OD Fender Washer

1. Place the provided left or right footplate template on the wheelchair footplate in the desired position.
2. Drill two 5/16” diameter holes through the footplate as marked on the template.
3. Adjust Comfort Foot Double to desired angle using base straps (A).
4. Screw two 1/4-20 x 1" or 1/4-20 x 1-1/4" bolts with the provided washers into position (B) for left side or (C) for right side from the bottom of the footplate into the Comfort Foot Double base. Note: use 1" bolts for Comfort Foot Double with Gel.
5. Wrap footplate straps (D) around wheelchair footplates and secure using side-release buckles.
6. Wrap rear strap (E) around leg rest tubing and secure with side release buckle. Tall style uses two rear straps to secure.

Comfort Foot Double bolt-on for right footplate:

1. Place template on the wheelchair footplate in the desired position.
2. Drill two 5/16” holes using the template above.

Comfort Foot Double bolt-on for right footplate:

1. Place template on the wheelchair footplate in the desired position.
2. Drill two 5/16” holes using the template above.

How to wash Comfort Foot Cover?

• All Comfort Company covers should be washed on a cold or warm cycle using any common laundry detergents.
• Once the cover has been washed, please hang a dry damp cover.
• If the cover cannot be removed: Spray and wipe with any household or commercial disinfectant, cleaner, or anti-bacterial spray.
• It is recommended that any cleaners or disinfectants be wiped away with a water-only damp cloth afterwards.