Cardinal Health Aluminum Lightweight Transport Chair

Brand/Manufacturer: CARDINAL HEALTH

Cardinal Health Aluminum Lightweight Transport Chair is designed for quick and easy patient transport without cumbersome bulkiness of a wheelchair. It features quick release fold-down back and removable swing-away leg riggings. Also features padded fixed armrests, dual push-to-lock rear wheel brakes, adjustable seat belt and powder-coated finish frame. Not made with natural rubber latex.

Cardinal Health Aluminum Lightweight Transport Chair is Discontinued by Manufacturer. You may look for the replacement. Click here for Invacare ProBasics Steel Transport Wheelchair With Swing Away Footrest


  • Invacare Manual Wheelchair has elevating and adjustable leg rests which include calf pads for added comfort
  • Fixed full-length arms for arm support along the entire depth of the seat
  • Vinyl arm pads provide cushioned support
  • Foot plates are height adjustable for a customized fit
  • Folds easily for convenient storage and transport
  • 8-inch mag-style and dual-locking rear wheels
  • Durable nylon padded upholstery seat is easy to clean
  • Steel construction with chrome or charcoal finish
  • Includes tool kit for minor repairs and replacement parts
  • Easy to assemble – tool kit included
  • Not Made with Natural Rubber Latex

More Information

Adjusting Transport Chair -

  • To Open Chair: Open chair by tilting to one side and pushing down on seat rail.
  • To Close/Fold Chair: To fold chair pull up locks and carefully fold down the back support. Place foot plates in a vertical position. Grab seat with both hands at front and back edges. Then lift or tilt chair to one side and lift up seat rail.
  • Adjusting Height of Foot Plates: Sit in chair with your feet on the foot plates. Loosen the bolt found on clamp around support assembly. Raise or lower foot plate to a position that provides the most support of your thighs. Front rigging should not be so low that it causes uncomfortable pressure to thighs at front of seat upholstery. Foot plates should not be lower than 2½ inches from the ground to ensure proper clearance.
  • Elevating/Lowering Leg Rests: Sit in chair with your feet on the foot plates. Hold the leg rest support tube to raise the leg rest until the desired position is reached. To lower the leg rest. Support the leg rest with one hand while pushing the release lever then slowly lower the leg rest to the desired position.
  • Removal of Leg or Foot Rests: Release lock by pushing on the front rigging lever. Swing leg or foot rest out and sideways then lift to remove.
  • Wheel Locks: Engage both wheel locks before getting in or out of chair, leaning forward in chair or while in an elevator or wheelchair lift. Locks are engaged by pushing handles completely forward. Adjustments to locks are made by loosening or tightening nut on the carriage bolt. Embed lock shoe at least 1/8 inch by sliding clamp toward rear wheel while handle is engaged in locked position. Tighten nut and bolt to secure in position. Test for correct locking action before actual use.

General Care -

  • Frame/Hand Grips: Wipe metal parts with a soft cloth at least once a week. All metal parts can be cleaned with auto wax or similar products. If exposed to moisture dry immediately. Do not use an abrasive cleanser that will scratch the finish. Use only a clean towel dampened with cool water when cleaning hand grips. Confirm that the grips are dry before using. NEVER use ammonia-based cleaning solutions or soap on hand grips, which may cause them to loosen or crack.
  • Wheels: Wheels should be inspected at least once a month to ensure proper tightness. If wheel wobbles or loose, release lock nut and tighten axle bolt slightly. Test for proper tightness and alignment by leaning chair to one side and spinning adjusted wheel.
  • Tires: Tires need minimal maintenance and should be cleaned as needed with a damp cloth. Replace if tires become worn or cracks appear.
  • Front Casters: Check casters and lubricate as needed. Lubricate by removing fork and greasing caster stem bearings with high-quality multi-purpose grease. Lubricate wheel bearings by removing wheel from fork. Reassemble fork and wheel by tightening nuts until no play remains, but wheels roll freely. If nuts are too loose, caster will shimmy and if it is too tight chair will be difficult to steer.




Weight capacity

300 lbs

Overall height


Overall width (Open)


Overall width (Closed)


Seat width


Seat depth


Seat to floor height


Seat back height



1 year warranty

Transport Chair Reviews

question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.



Patricia Bailey     08/21/2017

My father is 6.5 will this wheelchair fit his length? 


Customer care    08/29/2017

As the vendor the dimensions of the chair is: 

  • Seat to floor height: 19-1/4". 
  • Overall height: 39-1/2"
  • Overall width: 22-1/4" open; 9-1/4" closed 
  • Seat width: 19"
  • Seat depth: 16"
  • Seat back height: 19"
  • 8" low-maintenance castor wheels
  • Weighs just 20-1/4 lbs without footrests with a 300-lb weight capacity



Elizabeth Hartzog     05/07/2017

Does this chair collapse for easy storage in the car?


Customer Care    05/08/2017

Yes, Cardinal Health Aluminum Lightweight Transport Chair can be folded for easy storage 

To Close/Fold Chair:
To fold chair, pull up on the locks simultaneously, and carefully fold down the back support. Place foot plates in a vertical position. Grab seat with both hands at front and back edges, then lift. Or, tilt chair to one side and lift up on seat rail.



ks     02/23/2017

Does it really weigh 41 lbs? 


Customer Care    02/24/2017

The weight of the Cardinal Health Aluminum Lightweight Transport Chair is 19lbs.



Leah     07/30/2016



Customer Care    08/01/2016

Thank you for reaching out to us. The weight is 41 lbs.


{{x.ShortDescription}} ...

What is HPFY’s return policy?

Customer satisfaction is our top priority. We stand behind our products. If the merchandise you received is defective or not what you expected it to be, and you wish to return the item, please submit a return request in the My Account section of our website, contact our Customer Service department at (866) 316-0162 / (203) 616-2850 or email us.

  1. Merchandise must be returned within 30 days of the receipt of your order. Returns are not accepted after 30 days.
  2. Items (including parts and accessories) must be returned in new, unused, and resalable condition in its original packaging.
  3. Before returning any product, the buyer must obtain a Return Authorization Number (RA#) from a customer service representative. With your RA# you will receive a prepaid return shipping label.
  4. Orders returned without obtaining an RA# will be entitled to receive only "In-Store Credit" that can be used towards future purchases.
  5. Return orders are subject to a 20% restocking fees.
  6. All custom orders and hygienic items are non-returnable. Refer to the “Non-Returnable Items” section for further details.
  7. Returns will be reviewed and inspected before issuing credit. Please allow 3 to 4 weeks for processing. The credit will be applied to your original method of payment.
  8. If the return is the result of a defective product or shipping error, we will refund the entire purchase amount and return shipping costs.

Which products are Non-Returnable?

Due to the hygienic nature of some items, they are non-returnable. The items listed below are non-returnable:

  1. All hygienic items.
  2. Opened personal care items.
  3. Anything opened, used, or tried on.
  4. All customized items.
  5. Besides these, items that have the “non-returnable” phrase on the website.

We reserve the right to make adjustments due to errors, changing market conditions, product discontinuation or typographical errors in advertisements. Images on the site may not always reflect the actual product. Footrests or leg-rests are not included with wheelchairs unless specified.

How do I receive a return authorization number?

You can submit a return request by logging into your account. You will receive the Return Authorization Number (RA#) details in the email within 2-3 business days.

  • Login to your account
  • Go to “order history”
  • Click on “return order”
  • Fill out the return form and Submit it

If you do not have an email address, we will make other accommodations for RA# Details. Write the RA# on your label affixed to your package prior to shipment.

How long does it take to receive a refund?

Please allow 3 to 4 weeks to process the returns. Once the item is received, and inspected, your refund will be processed and automatically applied to your credit card or original method of payment.

Is there any Restocking Fees?

  1. 20% restocking fees will be applied.
  2. Outbound shipping cost is non-refundable.
  3. For orders that qualified for free shipping, $8.99 will be deducted from the refund if the product is returned.

Also available:

${{ x.OurPrice | currency: "" : 2}}
Please enter your and your friends email address below.
Fields marked with * are compulsory


Submit Cancel
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using