Bard LUBRI-SIL I.C. Complete Care Foley Catheter Tray With Drainage Bag
Bard LUBRI-SIL I.C. Complete Care Foley Catheter Tray With Drainage Bag

Bard LUBRI-SIL I.C. Complete Care Foley Catheter Tray With Drainage Bag

Brand/Manufacturer: BARD INC

Bard LUBRI-SIL I.C. Complete Care Foley Catheter Tray With Drainage Bag features a 5cc Bardex anti-infective latex foley catheter with bacti-guard silver alloy coating and hydrogel, pre-connected to a infection control drainage bag. It incorporates a tamper-evident seal at the catheter, the Ez-Lok sampling port and the microbicidal outlet tube.

Bard LUBRI-SIL I.C. Complete Care Foley Catheter Tray Contents:

  • Lubri-Sil I.C. antimicrobial foley catheter 
  • 2000ml infection control drainage bag 
  • Uro-Prep tray which contains all materials necessary for aseptic catheter insertion

Item #DescPkgRewardPrice 
900116A With 16FR Catheter Each $2.00
900116A With 16FR Catheter 10/Case $19.55
900118A With 18FR Catheter Each $2.40
900118A With 18FR Catheter 10/Case $23.50

LUBRI-SIL I.C. Foley Catheter Tray Features

  • Uro-Prep tray contains:
  • - Drape
    - Underpad
    - Powder-free, latex-free exam gloves
    - Forceps
    - Rayon balls
    - Pre-filled inflation syringe
    - Lubricant
    - Povidone-iodine solution
    - Specimen container and label
  • Foley catheter reduces bacterial adherence and biofilm formation
  • Microbicidal outlet tube protects the drain bag from contamination resulting from retrograde bacterial migration
  • Ez-Lok sampling port eliminates the risk of needlestick injuries and allows for needle-free aspiration
  • Tamper-evident seal provides a clear indication of system opening, a key area of bacterial entrance to the urinary tract
  • Latex-free

More About LUBRI-SIL I.C. Foley Catheter Tray

EZ-Lok Guidelines for Drainage:
  • Occlude drainage tubing a minimum of 3" below the sampling port by kinking the tubing until urine is visible under the access site
  • Swab surface of Bard EZ-Lok Sampling Port with antiseptic wipe 
  • Using aseptic technique, position the syringe in the center of the sampling port. The syringe should be held perpendicular to the surface of the sampling port (at approximately 80o-100o angle), press the syringe firmly and twist gently to access the sampling port
  • Slowly aspirate urine sample into syringe and remove from sample port
  • Unkink tubing and transfer urine specimen into specimen cup, discard syringe according to hospital protocol
  • Follow established hospital protocol for specimen labeling and transport to lab

Inflation/Deflation Guidelines:

  • Proper Catheter Inflation:
    Ensure that the Bard Foley catheter balloon is positioned well within the patients bladder.
    - Slowly, with a gentle, constant force, inflate the Bard Foley catheter balloon with the volume prescribed on the package. Note that a 5cc balloon must be inflated with between 9cc and 10cc of sterile water.
    - Improperly inflated Bard Foley catheter balloons may cause drainage and deflation difficulties.
  • Catheter Deflation:
    Select a luer slip syringe
    - Slide the plunger of the syringe up and down the barrel of the syringe several times to "loosen it up"
    - Compress the plunger all the way and then pull back the plunger slightly so that it does not adhere to the front of the syringe barrel
    - Gently insert syringe in the catheter valve
    - Do not use more force than is required to make the syringe "stick" in the valve
    - Allow the pressure within the balloon to force the plunger back and fill the syringe with water
    - If you notice slow or no deflation, re-seat the syringe gently, once again, allow the balloon to deflate slowly on its own
    - If the balloon does not deflate, reposition the patient
    - Ensure that the catheter is not in traction - the proximal end of the catheter is not compressed within the bladder neck
    - Ensure that urine flows freely
    - Attempt to deflate the balloon by using the pressure in the balloon to force water into the syringe
    - If the balloon still fails to deflate, apply very gentle, slow aspiration, aspiration that is too rapid or too forceful, may cause the inflation lumen within the Foley catheter to collapse
    - If permitted by hospital protocol, the valve arm may be severed
    - If this fails, contact an adequately trained professional for assistance, as directed by hospital protocol

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using