Bard Bardia Closed System Foley Tray

Bardia Closed System Foley Insertion Tray with Drainage Bag Features

• The components of the tray are typically packaged in a sterile manner to prevent contamination
• Comes with a pre-connected urinary catheter, which is designed to be inserted into the bladder through the urethra
• CSR wrap covered tray
• The 5cc silicone elastomer coated latex Foley catheter is preconnected to a 2000 mL urine drainage bag

Frequently Bought Together

• Bard Surestep Post Insertion Foley Care Wipes
• Hollister Onli Intermittent Catheter
• Coloplast Self Cath Intermittent Self Catheterization DVD

How to use Foley Catheters with 5cc Balloon Capacity?

Inflation Instructions:

• Ensure that the catheter balloon is positioned well within the bladder of the patient
• Slowly, with a gentle, constant force, inflate the catheter balloon with the volume prescribed on the package
• Note that the balloon must be inflated with sterile water
• Improperly inflated Bard Foley catheter balloons may cause drainage and deflation difficulties
• Using fluid other than sterile water may cause the balloon not to empty properly, especially after long dwell times

Properly Inflated

Under Inflated

 

Deflation Instructions:

• Select a luer lock or slip tip syringe
• Slide the plunger of the syringe up and down the barrel of the syringe several times to "loosen it up"
• Compress the plunger all the way and then pull back the plunger slightly so that it does not adhere to the front of the syringe barrel
• Gently insert the syringe into the catheter valve
• Do not use more force than is required to make the syringe "stick" in the valve
• Allow the pressure within the balloon to force the plunger back and fill the syringe with water
• If you notice slow or no deflation, re-seat the syringe gently. Once again, allow the balloon to deflate slowly on its own
• If the balloon does not deflate, reposition the patient
• Ensure that the foley catheter is not in traction- the proximal end of the catheter is not compressed within the bladder neck
• Ensure that urine flows freely
• Attempt to deflate the balloon by using the pressure in the balloon to force water into the syringe as described above
• If the balloon still fails to deflate, apply very gentle slow aspiration. The aspiration that is too rapid, or too forceful, may cause the inflation lumen within the Foley catheter to collapse.
• If permitted by hospital protocol, the valve arm may be severed
• If this fails, contact an adequately trained professional for assistance, as directed by hospital protocol

Precautions:

• Do not use ointments or lubricants having a petrolatum base. They will damage the catheter.
• Visually inspect the product for any imperfections or surface deterioration prior to use
• Inflate the balloon with sterile water to the volume stated on the inflation lumen of the catheter by using a water-filled Luer tip syringe
• Do not use needle
• Do not exceed recommended capacities