AMFAB Automatic Versatilt Overbed Table

AMFAB Automatic Versatilt Overbed Table Features

• Used for reading, crafts, writing, laptops and many other purposes where having an over the bed surface is desirable
• Infinitely height adjustable between 26-1/2" to 39"
• Chrome plated 16 and 17 gauge welded tubular steel column and H-base
• 1-1/2" dual wheel casters provide maneuverability on carpeting, wood, or tile floors
• 13 gauge stamped steel support bracket
• Walnut wood grain melamine laminate on 3/4" particleboard core
• Tubular steel construction supports weights up to 50 lbs when the top is in its lowest position
• Top tilts 33 degrees in a positive locking position in either direction
• Raised, T-mold platsic edge prevents papers from falling when the top is in the tilted position
• Durable chrome finish on the base and column allow for years of use
• AMFAB overbed table top measures 15" x 30"
• Product weight is 29 lbs
• Measures 1.8 cubic feet

How To Use AMFAB Versatilt Overbed Table?

• 9/16" Wrenches
• Philips Screw Driver

1. Lay tabletop assembly on workbench or floor with top bracket assembly facing up.
2. Install column assembly into top bracket with release handle facing away from table top edge. Insert 2-1/4" bolt through top bracket and column assemblies. Fasten with locknut.
3. Lay the base flat with holes facing up and insert a caster into each hole.
4. Place the two bolts into the bolt plate and place through the base. Hold base steady while hand tightening bolts into column.
5. Align the base and top assembly by laying the table on its side, resting on the edge of the top and the black caster plugs. Tighten the bolts with a 9/16" wrench.
6. Stand the AMFAB tilt top overbed table up on its casters.
7. Remove black lock screw in the column and discard. Replace with the extra zinc plated screw shipped with unit, using a Phillips screw driver.

1. Pull the release handle of AMFAB Automatic Versatilt Overbed Table up to raise and lower the tabletop.
2. To tilt the tabletop in either direction, squeeze the tilt lock lever up and rotate the tabletop.
3. Release tilt lever to lock the top into place.