3B Medical Lumin Bullet CPAP Hose Cleaner is designed to effectively stop the formation of biofilm build up and works with powerful germicidal UVC light that destroys germs and pathogens in 60 seconds. The lumin bullet is universally compatible with almost every brand and style of CPAP hose and heated tubing.
Lumin Bullet CPAP Hose Cleaner Features
- USB charging cord included
- Simple and easy method to clean
- Fast cleaning with no waiting period
- No chemicals required
- Lightweight and portable
Why to choose 3B Medical Lumin Hose Cleaner?
- Effortlessly Sanitize a CPAP Hose in Under 2 Minutes
To sanitize a CPAP tube only requires inserting the sanitizing probe into the hose and collapsing the Lumin Bullet casing around the probe. As you pass the hose through the Lumin Bullet with your hand, the magnets in the casing will pick up the sanitizing probe and then direct it almost easily through the tube. The Lumin Bullet can handle kinks, twists, and turns easily, gliding gently through the hose and sanitizing along the way.
- Safe and Effective CPAP Hose Sanitization
The Lumin CPAP Cleaner and Lumin Bullet are both safe and effective ways to achieve complete CPAP tube sanitization, posing few risks to the person using the device or others in the household.
- No Chemicals, Waiting Period, or Mess!
You would not need to use any chemicals, soap, water, or vinegar with this kit. Unlike ozone cleaners, there's no waiting period between the time you get done cleaning and the time you can start using your equipment. Use it once, and go back to sleep right away.
- One Charge Good for 30 Uses
Every time you charge the Lumin Bullet, it will last for 30 cleaning cycles. The long-lasting battery isn't something that always needs to be fully charged and gives you the freedom to clean your hose at home or on the road.
When to use Lumin Bullet CPAP Hose Cleansing Machine?
The Lumin BULLET is a device intended to disinfect Continuous Positive Airway Pressure (CPAP) hoses . A person using a PAP device to treat Obstructive Sleep Apnea (OSA) may use Bullet to sanitize their hose and heated tubing to augment their PAP equipment manufacturer’s recommended cleaning instructions. The Lumin
Bullet is intended for home use.
How LM4000 CPAP Hose Cleaner Works?
Lumin works by emitting high energy light within a narrow spectrum referred to as UV-C. The Lumin relies on a lhigh powered germicidal UVC-LED designed to produce the highest amounts of UV energy – where 90% of energy is generated around 254nm. This light is very close to the peak of the germicidal effectiveness curve of 265nm, the most lethal wave to microorganisms. The dose of UV-C emitted in one 1 minute cycle is sufficient to kill most bacteria and mold on a surface. The use of UV-C is environmentally friendly, leaves no residue or toxic gases or chemicals. UV-C systems are currently in use to disinfect operating rooms, ambulances, emergency service vehicles and other high touch areas.
What to buy with 3B Lumin Cleanser
How to use Lumin Bullet CPAP Hose Cleaning System?
How to operate Lumin CPAP Hose Cleaner?
- Charge 3B Medical Lumin Bullet by plugging in USB cord to bottom of Bullet.
- The Bullet will glow RED while charging, and GREEN when fully charged.
- Remove Bullet and place inside CPAP tubing so there is enough tubing hanging over to pull the tubing.
- Place Bullet in shell, you will feel the magnets grab the Bullet.
- Close shell and slide clasp until the shell locks, your Bullet is now activated.
- Pull the tubing all the way to the right, then back to the left, ensuring you cover the entire length of tubing twice, this process should take 30-60 seconds for optimal disinfection.
- Remove hose from Bullet, it is now ready to use.
How to charge Lumin Bullet?
In order to charge the Lumin Bullet, you'll need to plug the included USB cord into the bottom of the silver sanitizing probe, and connect the larger end into a USB charging plug. The same plug that works for your cellphone charger will work for the Lumin Bullet. After plugging the USB charging plug into the wall, the probe should glow red while charging, and light up green when fully charged.
How to clean the Lumin Bullet Case
The Lumin Bullet should never be immersed in water, as this can cause the loss of the product. Wipe down with a moist cloth, and allow to air dry. Do not use any cleaning solvents or harsh chemicals, as this can damage the Lumin Bullet.
Lumin Bullet CPAP Hose Cleaner User Manual 
