Drive Cruiser X4 Lightweight Dual-Axle Wheelchair
Drive Cruiser X4 Lightweight Dual-Axle Wheelchair

Drive Cruiser X4 Lightweight Dual-Axle Wheelchair

Brand/Manufacturer: DRIVE MEDICAL
Save
Authorized Retailer Badge

Drive Cruiser X4 Lightweight Dual-Axle Wheelchair is a simple to push and transport wheelchair that can convey the greatest weight heap of 34 lbs. User-friendly and comfortable Cruiser X4 highlights padded height-adjusting armrests, swing-away footrests, elevating leg rests and tool-free adjustable length riggings. Accessible in 16", 18” and 20" seat width sizes, the lightweight dual-axle Cruiser X4 wheelchair is secured with push-to-lock wheel lock.

Cruiser X4 WheelchairSeat WidthArmrestFront Riggings
CX416ADDA-ELR16"Height Adjustable Flip-Back Desk ArmElevating Leg Rest
CX416ADDA-SF16"Height Adjustable Flip-Back Desk ArmSwing Away Footrest
CX416ADFA-ELR16"Height Adjustable Flip-Back Full ArmElevating Leg Rest
CX416ADFA-SF16"Height Adjustable Flip-Back Full ArmSwing Away Footrest
CX418ADDA-ELR18"Height Adjustable Flip-Back Desk ArmElevating Leg Rest
CX418ADDA-SF18"Height Adjustable Flip-Back Desk ArmSwing Away Footrest
CX418ADFA-ELR 18"Height Adjustable Flip-Back Full ArmElevating Leg Rest
CX418ADFA-SF 18"Height Adjustable Flip-Back Full ArmSwing Away Footrest
CX420ADDA-ELR20"Height Adjustable Flip-Back Desk ArmElevating Leg Rest
CX420ADDA-SF20"Height Adjustable Flip-Back Desk ArmSwing Away Footrest
CX420ADFA-ELR20"Height Adjustable Flip-Back Full ArmElevating Leg Rest
CX420ADFA-SF20"Height Adjustable Flip-Back Full ArmSwing Away Footrest

Configure your product below:

Buy this product and earn 9.65 Reward Dollars.

Shipping Charges Applicable

  • ORDERING DETAILS
  • Seat Width
  • Armrest
  • Legrest
  • Total: $270.99
    Total: $192.99
Total: $270.99
Total: $192.99

Cruiser X4 Dual-Axle Wheelchair

Patient Comfort:

  • Weighs 34 pounds or less when properly equipped in the basic configuration (excluding front rigging)
  • Lightweight wheelchair is easy to propel and transport
  • Dual over center cross links provide added rigidity
  • Offers versatility, functionality, ease of transport and low maintenance
  • Padded armrests provide added patient comfort
  • Click Here for User Manual

Frame Design:

  • Cruiser X4 is ultra-lightweight, yet extremely strong due to its aluminum and carbon steel frame
  • Aluminum and Carbon steel blended frame with combination powder coated and silver vein finish is attractive, chip resistant and easy-to-maintain
  • Frame style is specially designed to allow for custom seat backs and accessories
  • Durable, flame retardant nylon upholstery resists mildew and bacteria

Height Adjustability:

  • Height adjustable segmented back
  • Flip-back, removable arm is height adjustable from top of seat rail 10" to 14" and features a front mounted easy-to-use lever release mechanism
  • Triple rear axle positions provide easy transition of seat height from standard to hemi level

Durable Footrests:

  • Cruiser X4 is available with either swing-away footrests or elevating leg rests (ELRs) with tool-free adjustable length riggings
  • These are a necessity if someone suffers from a condition such as edema, phlebitis, varicose veins or just tired legs.
  • Composite footplates with heel loops are durable and lightweight

Wheels of Cruiser X4:

  • 3 position quick release rear axles mounted on Composite Mag-style wheels with composite hand rims are lightweight and maintenance free
  • Rear wheels can be quickly and easily moved between three separate axles to adjust the seat to the ideal height for the user or to angle the seat back
  • Offers a one-of-a-kind wheel lock system that provides a folding extendable handle to make locking the rear wheels easy-even for those with less hand strength
  • Precision sealed wheel bearings through-out ensure long lasting and reliability
  • 8" front casters have 3 height adjustments and angle adjustments
  • Height and angle of the front caster wheels allow the user to tailor the Cruiser X4 to his/her specific needs
  • Polyurethane rear tires and composite casters offer superior performance, smoother ride and are lightweight

Parts Description:

Click Here for Parts Description

Drive Cruiser X4 Lightweight Dual-Axle Wheelchair

Use And Safety Of Cruiser X4

Wheel Locks:

Engage both wheel locks before getting in or out of chair, leaning forward in chair, or while in an elevator or wheelchair lift. Proper adjustment of wheel lock is at least 1/8” when locked. Locks are engaged by pushing handle completely forward. Adjustments to locks are made by loosening or tightening nut on the carriage bolt. Embed lock shoe at least 1/8” by sliding clamp toward rear wheel while handle is engaged in locked position. Tighten nut and bolt to secure in position. Test for correct locking action before actual use.

Tires:

Solid rubber tires need minimal maintenance, but should be cleaned occasionally with a damp cloth. Replace if tires become severely worn or cracking appears.

Front Casters:

Casters should be checked periodically and lubricated occasionally. Lubricate by removing fork and greasing caster stem bearings. Lubricate wheel bearings by removing wheel from fork. Reassemble fork and wheel by tightening nuts until no play remains, but wheels roll freely. If nut is too loose, caster will shimmy, if too tight, chair will be hard to steer.

Removal Of Swing-Away Foot Rests/Leg Rests:

Release lock by pushing on the front rigging lever. Swing-away foot rest /leg rest out and sideways. Lift to remove.

Adjusting Length Of Foot Rest/Leg Rest:

When adjusting length of foot rests or leg rests, user should be sitting in wheelchair with feet on the foot plates. Loosen bolt on the clamp around support assembly. Raise or lower foot plate to desired position that will provide maximum support of thighs. Front rigging should not be so low that it causes uncomfortable pressure to thighs at front of seat upholstery. Footrest should not be lower than 2-1/2” from the ground to ensure clearance.

Adjusting/Elevating Leg Rest:

Lift foot plate on leg rest assembly to desired position. Release leg rest assembly and it will automatically lock into place. To lower, push out on leg rest lever and lower foot plate to desired position.

Wheels:

Large rear wheels should be inspected at least once a month to ensure proper tightness. If wheel wobbles or is loose, release lock nut and tighten axle bolt slightly. Test for proper tightness by learning chair to one side and spin adjusted wheel.

General Care:

Wipe chrome parts with a clean, soft cloth at least once a week. All metal parts can be cleaned with auto wax or similar products. If exposed to moisture, dry immediately. Do not use an abrasive cleanser that will scratch the finish of Adjustable Wheelchair.

To Open Chair:

Open wheelchair by tilting to one side and pushing down on seat rail until fully opened.

To Close/Fold Chair:

First fold foot plates to vertical position. Grab seat with both hands at front and back edge and lift. Or, tilt chair to one side and lift up on seat rail.

Removable Arms:

Remove arms by depressing spring button and lifting arms out of front and rear sockets.

Cruiser X4 Specifications

Particulars16"18"20"
Product Overall Width Open23"25"27"
Width Closed12"12"12"
Height36"36"36"
Seat-to-Floor Height17"18"19"
Back Height16" - 17.5"16" - 17.5"16" - 17.5"
Length with Riggings43"43"43"
Product Weight without Riggings 32 lbs34 lbs36 lbs
Carton Shipping Weight 46 lbs48 lbs50 lbs
Weight Limit300 lbs300 lbs300 lbs

Warranty

  • Warranty on Frame : Limited Lifetime
  • Warranty : Limited Lifetime

Customer Reviews

Questions & Answers


 
 

Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
question image
I am looking for an adjustable height left arm rest for the Cruise x 4.  do you have one?  It could be a left sided desk. 
barbara kosnik - 2/2/2018 5:27:07 PM
facebooktwitter
answer image
Drive Cruiser X4 Lightweight Dual-Axle Wheelchair comes with the options "Height Adjustable Flip-Back Desk Arm ($0)" and Height Adjustable Flip-Back Full Arm ($0) . you can buy any option according to your preference. If you have any further quarry please get back to us.

Team HPFY
Customer Care - 2/3/2018 6:34:30 AM
question image
What should I do to raise the back of the chair?
Shailley - 4/12/2017 1:18:27 AM
facebooktwitter
answer image
The back canes of Cruiser X4 have adjustment holes in them that can be easily adjusted.
Customer Care - 4/13/2017 2:42:34 AM
question image
From what material is this wheelchair made of?
Brian - 4/12/2017 1:17:53 AM
facebooktwitter
answer image
Cruiser X4 has Aluminum and Carbon steel blended frame with combination powder coated and silver vein finish, which is attractive, chip resistant and easy-to-maintain.
Customer Care - 4/13/2017 2:42:24 AM
question image
How am I supposed to fold it for storage purposes?
Catherine - 4/12/2017 1:17:27 AM
facebooktwitter
answer image
First, fold footplates to vertical position. Grab seat with both hands at front and back edge and lift. Or, tilt chair to one side and lift up on seat rail.
Customer Care - 4/13/2017 2:42:12 AM
question image
How should I unfold it once I got it out of the box?
Maria - 4/12/2017 1:16:57 AM
facebooktwitter
answer image
To unfold the Cruiser X4, open the wheelchair by tilting to one side and pushing down on seat rail until fully opened.
Customer Care - 4/13/2017 2:41:58 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close