Skil-Care Foot Cradle

Features

• Skil-Care Foot Cradle includes one set of 1-inch-thick pads
• Pads are secured by means of Velcro strips 
• Covered in durable, wipe-clean vinyl 
• Easy Care
• Also Available: (Sold Separately)
  Skil-Care Contracture Accommodation Kit Used With Foot Cradle
• Click Here for User Manual
   

More Information

• Installation:
  1. Remove the front screws and washers from the left and right sides of the wheelchair seat. Do not discard. They will be needed to install the Foot Cradle.
  2. Release the buckles on the top left and right sides of the Foot Cradle and remove the web tabs that have the female buckle ends sewn to them.
  3. At each side of the wheelchair seat, place the web tab, buckle side facing up, between the seat upholstery and seat frame. Insert screw and washer assembly removed in step 1 through the holes in the upholstery and web section and secure to frame.
  4. Place the Foot Cradle on the footrests and insert the male ends of the buckles into the female ends.
  5. At each side of the footrest, bring the Velcro strap around the footrest support bar.
  6. Thread Velcro strap through d-ring and press the hook material against the loop material to secure
  7. Raise or lower Foot Cradle by adjusting webbing at both sides of the top of the device.
  8. Use pads to accommodate for different degrees of contracture. Pads are secured by means of Velcro strips
  
  
• Easy Care: 
  - Skilcares Foot Cradle is covered with durable vinyl for long-term use. Use a spray-type cleanser and damp cloth to clean. Accumulated lint and fibers may be removed from the Velcro straps using a small, stiff brush. 
  
  
• Safety Caution:
  - Remove the Foot Cradle from the wheelchair and rotate the footrests to the sides before assisting the resident into or out of the wheelchair.