Save 20% On Your First Autoship Order

Day
:
:
Online since 2002 |   866-316-0162

View product option

Parabath Paraffin Bath

This product has been permanently discontinued by the manufacturer.


Parabath Paraffin Bath provides soothing moist heat to warm joints, tissue, and skin for the treatment of arthritis, strains, sprains, and joint stiffness. Add low-melt paraffin wax to the heating system, then submerge hand, foot, or any other affected body part to feel the soothing relief provided by paraffin wax.


Parabath Paraffin Bath Features

  • Provides soothing moist heat to warm joints, tissue and skin
  • Ideal for the treatment of arthritis, strains, sprains, joint stiffness, sports injuries, dry skin and to increase range of motion
  • Deep oversized stainless steel tank with insulated outer housing allows easy immersion of hand and wrist, food and ankle, or elbow
  • Thermostatically controlled from 126-134 degrees Fahrenheit, requires 110/120 volts
  • Includes 6 lbs. unscented paraffin
  • Parabath Paraffin Bath Product Manual
  • Also available (sold separately)
    -Mobile Parabath Stand (Code: 24212)

More Information

  • Indications:
    - The Parabath" Unit is used to relieve pain associated with arthritis and chronic joint inflammation for the hands, feet and elbows. It may also be used to soften dry, cracked skin.
  • Contra Indications:
    - Do not use the Parabath Unit:
    1.When open cuts or broken skin is present.
    2.In the presence of inflamed or irritated skin conditions.
    3.When peripheral vascular disease or impaired circulation is present. 4.If sensation of the hand or foot is reduced or absent, such as in some cases of diabetes.
  • Cleaning and Refilling
    - The Parabath Unit Bath should be cleaned when significant discoloration or yellowing of the paraffin is noticed, or when excessive sediment is observed in the tank. Do not attempt to clean and refill the unit while it is plugged in.
  • Procedure to Empty and Clean the tank:
    1. Unplug the unit.
    2. Empty the paraffin tank by the following method: While in liquid form, lay the cover crosswise on the tank and place a length of rope with knots on each end into the paraffin. Allow the paraffin to cool and solidify, requiring approximately 24 hours. Plug the unit in just long enough for the paraffin to loosen in the tank. Unplug the unit and pull out the rope with paraffin attached in block form.
    3. Clean the tank: Do not use water to clean the unit. Never expose the unit to water or submerge the unit in water. Use paper towels and a mild, non-abrasive, non-chlorine-based household cleanser to remove remaining paraffin residue.
    4. Refill the tank with Parabath Universal Paraffin Refills.
  • Note: Use of an abrasive or chlorine-based cleanser could damage the stainless steel surface of the tank.
  • Instructions For Use:
    - Unpack the Parabath Unit and place it on a sturdy, level surface
    - Remove the packaging materials from the Parabath Universal Paraffin, then stack all 6 bars inside the tank
    - Plugin the electrical cord. The amber power light on the unit indicates the unit is operating. Do not use the unit for at least 5 hours after it is first plugged in.
    - Place the lid on the unit to cover the melting tank and wait a minimum of 5 hours after it is first plugged in.
    - Place the lid on the unit to cover the melting tank and wait a minimum of 5 hours before using. The usable operating temperature is from 126 degree-134 degree F/52°C - 57°C.

Product Videos

Related Articles

{{x.Heading}}

{{x.ShortDescription}} ...

Share

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
Message
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close