PLEASE READ ALL OF THE DIRECTIONS PRIOR TO ASSEMBLY:
1. First undo the Velcro® and pull back the nylon flap cover that holds the tunnel in the collapsed position.The tunnel will open up automatically, as it is basically one large spring.
2. When the tunnel is fully extended, it can be used alone or connect to other Enormous tunnels for “Miles” of fun.
Connecting your “Super Enormous” Tunnel to other PPT Tunnels:
1. Place the two tunnels to be joined together end to end, making sure that the nylon flap that holds the tunnel together for storage is in the middle.
2. Insert one “Super Enormous” Tunnel, “See-Me” Tunnel, or “Find-Me” Tunnel approximately 6” into the other one.
3. Roll the nylon flap off of the main tunnel and over the rim of the other tunnel; like a sleeve.
4. Attach the Velcro on the nylon flap until the tunnels are joined snugly together and tighten the connector.
5. You are now ready for “Miles” of fun.
Putting the Tunnel away:
To put the Tunnel away, compress the tunnel down until it is completely flat. Then pull the extended nylon flap cover back over the compressed tunnel and pull the Velcro ties around to secure it. Remember to always keep a firm grip on the Tunnel while compressing it down.
Some additional Tips:
1. The Play Tunnel should be opened with adult supervision. DO NOT allow children to jump on the tunnel.
2. Use the Play Tunnel on a soft or smooth surface only. Avoid sharp objects while playing.
3. Do not use the play tunnel near any open flame or fireplace.
4. The play tunnel is made from water repellent nylon. However, tunnel should not be left in the yard for prolonged periods of time, as sunlight can weaken or fade the nylon. Continued exposure to water (from sprinklers) can cause mildewing.

When the tunnel is fully extended, it can be used alone or connect to other Enormous tunnels for “Miles” of fun