Operation:

• The Somatosensory Musical Bead Chain/Switch requires 2AA batteries. Use alkaline batteries only (e.g. Duracell or Energizer brand). Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly. Never mix old and new batteries together or different brands or types together.
• The battery compartment is located under the unit. Carefully turn the unit over. For safety and performance reasons, the battery case cover is secured with one small screw. Remove this screw by turning it counterclockwise with a Phillips head screwdriver. Install 2AA batteries, being careful to observe proper battery polarity.
• Replace the battery case cover and secure with the screw. Do not overtighten.
• Movement of the beads will activate a well-known musical tune for the enjoyment of all.
• The music will only continue while the beads continue to be set into motion. Once the beads stop moving, the music will stop as well.
• To operate this unit as a switch, use the male to male cord provided to connect the unit to an external toy or device via the 1/8” jack on the back of the unit. An adapter must be used to accommodate activation of external toys or devices with ¼” jacks, such as our item No.1160. If you use other ¼” or 1/8” adapters, they must be mono adapters, not stereo.
• Make sure that you have TIGHT connections. There should be no gaps.
• When using this unit as an external capability switch, the music will be canceled out.
• The toy or device connected to the bead chain will remain activated only while the beads are kept in motion.