Aspen Vista CTO Cervical Thoracic Orthosis

What makes Aspen Vista CTO Unique

Locking Sternal Adjustment
A patient's anatomy can be easily accommodated by adjusting the support strut's angle before locking it in place.

Flexible Thoracic Adjustment
Almost all patient anatomy can be accommodated by one size, which can be adjusted both at the initial fit and throughout repositioning.

Padded CTO Orthosis
Every point of contact with the patient is fully cushioned to provide comfort and promote better patient compliance.

Flexible Back Support Struct
Even when the patient is lying flat, the adjustable, low-profile back strut is made to provide maximum comfort.

Better Skin Care
Clickable polyurethane foam aids to guarantee proper pressure distribution while Aspen cotton-lined cushions drain moisture away from the patient's skin.

What to buy with Aspen Vista CTO

• Core Tri-Core Cervical Support Pillow
• Fabrication Point Relief ColdSpot Lotion Gel
• Core Traction Harness System

Indications for Using Aspen Vista CTO Brace

The Aspen Vista Cervical Thoracic Orthosis restrict the motion of cervical spine helping to manage and deal with following conditions:

• Spine Decompressive Procedures
• Fracture management
• Cervical disc syndrome
• To deal with musculoskeletal pain
• To manage Whiplash, Sprains/strains, Cervicogenic headache

How to Use Vista CTO Orthosis

1. Vista CTO Collar Height Adjustment

   Start by adjusting the height of the CTO Collar
   1. Apply Vista CTO Anterior Panel on the front of the Vista Collar with your index fingers
   2. Pull and twist the provided adjustment dial to change the Vista Collar's height
      

      

2. Adjusting the CTO Vest

   1. Choose the custom angle according to the user build by disengaging the angle adjustment yoke pushing the button, and pulling it apart. Make sure the customized angle is secured by tightening the yoke
   2. To adjust the verticle height, the secondary lock beneath the primary yellow lock must be depressed, and the yellow primary lock should be pushed downward to adjust the height of the CTO brace
   3. Turn the dial until the vest is positioned where you want it to be. The vest should be positioned as low as feasible when fitting a patient who is lying down
   4. Engage the primary lock by swiping up the yellow button
      

      

      

      

3. Positioning Lumbar Panel

   1. Put the back panel beneath the lumbar spine
   2. To the sides of the vest, fasten the back panel clips
   3. Pull the strap ends equally to secure the back panel in place. To ensure comfort, modify the strap padding
      

      

      

Caring for your Aspen CTO Brace

A. Washing the support pads

• Remove the pads
• Genetely pull the pad away from the hook dots, you can remove the pads from the item

B. Cleaning the support pads

• Wash pads by hand in warm water and light soap. Never use bleach or a washing machine. Thoroughly rinse
• You can clean the product's plastic packaging with some mild soap and water. Before re-attaching pads, rinse and towel dry

C. Drying the foam pads

• Press pads with a towel to squeeze out extra water. Lay on a towel and let thoroughly air dry. Don't dry with heat. While the pads are drying, swap them out.

Precautions and Contradictions while using Aspen Vista CTO Brace

• Proper training should be taken before using the CTO system
• Provided directions are guideline to safely use the product according to needs and are not medically recommended
• Please consult medical proffesionals before using CTO brace if pateint is suffering from serious medical conditions
• Make sure the cervical orthosis is fitted properly for it being effective
• Stop using the brace if facing any hypersensitivity or allergies are experience from any of the materials used
• Patients with lymphatic tissue swelling caused by circulatory disorders are not allowed to use the Aspen Vista CTO