Invacare Reduced Gap Full Length Bed Rail

How to use Invacare Reduced Gap Bed Rail?

Installing Invacare Bed Rails

1. Extend one bed rail to reach the head end and foot end crossbraces.
2. Insert the outer telescoping tube of the bed rail into the barrel of the head end crossbrace.
3. Pull and hold the plunger knob on the barrel while lowering the bed rail.
4. Release the plunger knob on the barrel.
5. Raise or lower the bed rail until the plunger pin clicks securely into the adjustment hole or until the bed rail stop rests against the barrel.
6. Insert the inner telescoping tube of the bed rail into the barrel of the foot end crossbrace.
7. Repeat Steps 3-5 for the inner telescoping tube of the bed rail, adjusting the bed rail to the position reached in Step 5.
8. Repeat Steps 1-7 to install the other bed rail onto the opposite side of the bed.

Lowering/Raising the Bed Rails

1. Hold bed rail while pulling the plunger knob.
2. Lower/raise bed rail.
3. Release plunger knob and lower/raise the bed rail until the plunger pin clicks into position unless the bed rail is at the lowest position.

Also available (Separately):

• Invacare IVC Full Electric Home Care Bed Package With Innerspring Mattress And Full Length Rails (Code BED2-1633)
   

Invacare Full Length Bed Rail User Manual

What to buy with Invacare Bed Rail?

• Essential Medical Pocket Pouch For Bed Rails
• Hermell Bed Rail Pads